617485

Singer P-1250 Manual

39
Zoom out
Zoom in
Previous page
1/46
Next page
37
Remonter le fil
de canette
Lorsque l’aiguille est enfilée et la canette en
place dans son support, le fil de canette doit être
remonté à traveers le trou de la plaque à aiguille.
1. Tenez de la main gauche légèrement le fil
d’aiguille.
• Tournez le volant à la main lentement vers
vous et faites descendre l’aiguille dans le t r o u
de la plaque à aiguille.
2. Continuez à tourner le volant jusqu’à ce que
l’aiguille remonte au-dessus de la plaque à
aiguille.
• Tire légèrement sur le fil d’aiguille pour faire
remonter la bouche du fil de canette.
3. Défaites la boucle avec les doigts.
4. Passez le fil de l’aiguille dans la fente gauche
du pied presseur.
• Faites glisser les deux fils en dessous du pied
presseur de l'avant vers l'arrière de la
machine.
1
2
3
4
Selector diseño del punto
Antes de mover el selector, asegúrese de que
la aguja está en su posición más alta.
• El selector de diseño del punto, situado en
el panel de control, controla la selección
del punto.
• Para seleccionar un diseño, deslice el
selector por debajo del punto deseado (A-
E).
Para una selección más sencilla, mueva el
selector de anchura del punto a la posición
de puntada recta ( ).
Posición selector de aguja
Antes de mover el selector, asegúrese de que
la aguja está en su posición más alta.
• La mayoría de los puntos en zig-zag se
harán con la aguja en su posición central
( ).
• Las posiciones izquierda ( ) y
derecha ( ) se utilizan para colocación
de puntadas especiales.
Selector anchura
de puntada
Antes de mover el selector, asegúrese de que
la aguja está en su posición más alta.
• Para producir un punto en zig-zag, el
selector debe moverse desde su posición
de costura en recto ( ) a cualquiera de
sus otras posiciones. Cuanto más mueva
hacia la derecha la palanca del selector,
más ancha será la puntada.
Costura Decorativa
Stitch pattern selector
Raise the needle to its highest position.
• Set the stitch width selector to the straight
position ( ). (This allows the pattern selector
to be moved easily).
• Slide the pattern selector to the center of the
desired pattern group (A-E).
Needle position selector
Before moving selector, make sure needle is
fully raised.
• Most of your zig-zag stitching will be done with
the needle in the center ( ) position.
• Left ( ) and right ( ) settings are used
for special stitch placement.
Stitch width selector
Before moving selector, make sure needle is
fully raised.
• To produce any of the zig-zag stitches, the
stitch width selector is moved from its straight
position ( ) to any of its other positions. The
further you move the selector lever toward the
right, the wider your stitch will be.
Decorative
stitching
5
52
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer P-1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer P-1250 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info