617485
44
Zoom out
Zoom in
Previous page
1/46
Next page
42
Sewing a seam
You can sew seams easily and accurately when
you follow the suggestions below.
Placing fabric under foot
Most fabrics can be placed under the foot by
raising the presser foot lifter (1) to its normal “Up”
position (2).
When using bulky fabric, multiple fabric layers
or an embroidery hoop, raise the lifter to the
highest position (3), thus increasing the space
between the foot and the needle plate.
Lower presser foot lifter all the way down and
you are ready to sew.
Basting
Pin basting and hand basting are easy ways to
make temporary seams before machine sewing.
To pin baste, insert pins at stitching line.
NEVER place pins on the underside of fabric in
contact with the feed. Do not sew over pins;
pull them out as you stitch.
To machine baste, make long stitches that can
be easily removed by setting the stitch length
selector to 5 and loosening the tension
slightly.
Keeping seams straight
To keep seams straight, use one of the
guidelines on the needle plate.
The most commonly used line (1), the 5/8”
(16 mm) seam allowance, is extended onto
the slide plate.
R e a l i z a c i ó n d e u n a
costura
Siguiendo las indicaciones siguientes,
podrá realizar costuras con facilidad y
precisión.
Colocación del tejido
debajo del prensatelas
La mayoria de los tejidos pueden colocarse
debajo del prensatelas, subiendo el elevador
del prensatelas (1) hasta su posición normal
“Up” (2).
Cuando se utilice un tejido grueso, de varias
capas o un aro de bordar, suba el elevador
hasta su posición alta (3); de este modo se
aumenta el espacio entre el prensatelas y le
plancha de aguja.
Baje el elevador del prensatelas en su
totalidad y estará preparada para coser.
Hilvanado
El hilvanado con alfileres y a mano son los
medios simples de realizar costuras
provisionales antes de coser a máquina.
Para hilvanar con alfileres, inserte alfileres
en la línea de costura. NUNCA coloque
alfileres sobre el reverso del tejido en
contacto con el arrastre. No cosa sobre los
alfileres; sáquelos según cose.
Para hilvanar, hacer puntadas largas que
se puedan quitar fácilmente, colocar el
selector largo de puntada a 5 y aflojar
ligeramente la tensión.
Como mantener
las costuras rectas
Para dirigir las costuras en línea recta, utilice
una de las líneas-guía de la plancha de aguja.
La línea utilizada con más frecuencia (1),
1,6cm de margen de costura, se extiende
sobre la plancha de aguja.
47
Le pied à ourlet roulotté est pratique pour rouler
le bord du tissu. Le pied à ourlet est conçu pour
coudre droit, évitez les courbes ou les
changements de direction.
Instructions à coudre
1. Choisissez un tissu souple et d'épaisseur
moyenne
2. Pour environ 1 pouce de tissu (2,5cm), pliez
et repassez un ourlet de 1/8 de pouce, puis
repliez encore une fois le tissu et repassez, pour
former un bord replié d'un quart
3. Installer le pied à ourlet roulotté
4. Sélectionnez un point droit de longueur
moyenne
5. Piquez environ ½ pouce de l'ourlet plié
6. Laissez l'aiguille dans le tissu et soulevez le
pied presseur
7. Faites passer le tissu dans l'anneau du pied
8. Baissez le pied et continuez à coudre, en
tenant fermement le bout du fil
Pied à Ourlet
Roulotté
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer P-1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer P-1250 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info