617485
45
Zoom out
Zoom in
Previous page
1/46
Next page
43
3
2
1
1
Assembler une couture
Pour assembler rapidement une couture, nous
vous conseillons la méthode suivante:
Comment positionner le tissu
sous le pied presseur
La plupart des tissus peuvent être placés sous le
pied presseur en soulevant le releveur du pied
presseur (1) en position 2.
Quand vous cousez du tissu épais ou plusieurs
épaisseurs de tissus, ou encore au cercle à
broder, relevez le pied en position 3. Cette
position augmente l’espace entre le pied et la
plaque à aiguille.
Avant de commencer à coudre, baissez
toujours le pied presseur.
Faufiler
Pour préparer la couture, vous pouvez bâtir à la
main ou utilisez des épingles.
positionnez les épingles, comme illustré, sur la
ligne de piqûre. Ne les présentez jamais sous
le pied presseur du té de la griffe
d’entrainement. Ne piquez pas sur les épingles
retirez-les au fur et à mesure .
Pour faufiler, régler la longueur du point en
déplaçant le sélecteur de la longueur du point à
la valeur « 5 » et diminuer légèrement la
tension du fil supérieur, cela produira un point
plus long qui sera plus facile à retirer.
Pour piquer droit
Servez-vous des lignes guides de la plaque à
aiguille pour piquer droit.
La plus utilisée de ces lignes (1) est celle qui se
continue aussi sur la plaque glissière. Elle
vous assure une valeur couture de 1,6cm si
l’aiguille est en position centrale.
46
Este pie dobla la orilla de la tela. Está diseñado
para coser recto, evitar curvas y giros
bruscos.Remontez l’aiguille en position haute.
Instrucciones para coser
1. Seleccione un material de tejido mediano.
2. Cosa una bastilla de 1 pulgada, prense un
dobladillo de 1/8 de pulgada, luego voltee la
tela de nuevo y prense, doblando un total
de 1/4 de la tela que volteo.
3. Instale el pie para hacer dobladillos.
4. Seleccione la puntada recta, longitud
mediana.
5. Cosa aproximadamente 1/2 pulgada del
dobladillo.
6. Deje la aguja dentro de la tela y levante el
prensatelas.
7. Guíe la tela dentro del rollo del pie.
8. Baje el prensatelas y continúe cosiendo,
halando el final del hilo firmemente.
Pie para dobladillos
(bastillado angosto)
The Rolled Hem Foot aids in rolling the fabric's
edge. This foot is designed to sew straight, so
avoid curves and sharp turns.Remontez l’aiguille
en position haute.
Sewing Instructions
1. Select a soft medium weight fabric.
2. For approximately 1 inch of the fabric, press a
1/8'' hem, then turn fabric again and
pressmaking for a total of a 1/4'' of fabric being
turned up.
3. Attach Rolled Hem Foot.
4. Select a Straight Stitch, medium length.
5. Stitch approximately 1/2'' of the folded hem.
6. Leave needle in fabric and lift presser foot.
7. Guide fabric into scroll of foot.
8. Lower foot and continue to sew, holding the
thread tails firmly.
Rolled (Narrow) Hem
Foot
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer P-1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer P-1250 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info