617485

Singer P-1250 Manual

38
Zoom out
Zoom in
Previous page
1/46
Next page
36
Raising the bobbin thread
Once the needle has been threaded and the
bobbin placed in the bobbin case, the bobbin
thread must be brought up through the hole in
the needle plate.
1. Hold needle thread loosely with left hand.
• Turn hand wheel slowly toward you, lowering
needle into hole in plate.
2. Continue to do this until needle rises above
needle plate.
• Pull gently on needle thread and bring up
bobbin thread in a loop.
3. Open loop with fingers to find end of bobbin
thread.
4. Draw needle thread through left side opening
in presser foot.
• Put both threads under the foot and to the
back of machine.
Extracción del hilo
de la bobina
Una vez enhebrada la aguja y la bobina
situada en su alojamiento, el hilo de esta
última deberá ser sacado a través del
agujero de la plancha de aguja.
1. Sujete el hilo de la aguja suavemente con
la mano izquierda.
• Gire el volante suavemente hacia Vd.
introduciendo la aguja en el agujero de la
plancha.
2. Continúe con esta operación hasta que el
hilo de la bobina salga a través de la
plancha de aguja.
• Tire suavemente del hilo de la aguja y
sacará el hilo de la bobina en un lazo.
3. Abra el lazo con los dedos para encontrar
el cabo del hilo de la bobina.
4. Guíe el hilo de la aguja hacia el lado
izquierdo a través de la ranura del
prensatelas.
• Ponga ambos hilos debajo del pie y por
atrás de la máquina.
53
Sélecteur de point
Remontez l’aiguille en position haute.
• Placez le sélecteur de largeur de point sur la
position point droit ( ). Cette position permet
le déplacement facile du sélecteur de point.
• Glissez le sélecteur de point au centre du
groupe de points désirés (A-E).
Sélecteur de
position d’aiguille
Avant de déplacer ce sélecteur, assurez-vous
que l’aiguille est en position haute.
• La plupart des points de zig-zag seront réalisés
avec l’aiguille en position centrale ( ).
• Les positions gauche ( ) et droite ( ) sont
utilisées dans des cas bien particuliers.
Sélecteur de
largeur de point
Avant de déplacer le sélecteur, assurez-vous
que l’aiguille est en position haute.
• Lorsque vous utilisez les points de zig-zag de
votre machine, ce sélecteur sera déplacé de la
position point droit ( ) vers l’une des autres
possibilités. Plus vous positionnerez ce
sélecteur vers la droite, plus les points seront
larges.
1 2 3 4 5
C
E
B
A
D
Couture Décoratif
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer P-1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer P-1250 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info