50953
7
Zoom out
Zoom in
Previous page
1/20
Next page
Manual SA 250
pag. 5
PCG/C SA 250 Manual 27-03-07
Add the article with the correct weight on the platform and press key .
The reading sets zero. The symbol at :
NET shows up.
Replace the article for the item to be checked and read the deviation in + or -.
This tare may be deleted by pressing key with an empty platform.
1. Count by hand a number of articles: 10, 20, 50,100 of 200 pieces.
The less weight of an article, the more pieces have to be used in order to
achieve an accurate counting.
2. Take care of an accurate zero reading: and standstill: .
Add the pre counted articles in one operation upon the platform.
3. Press keys . The available quantities show up on the display
as running numbers. Press key again at the moment the correct
quantity appears on the display.
4. Now the scale counts the number of articles, the display shows the number
of articles.
The arrow at indicates that the parts counting mode is in operation.
5. With key may be switched (i.e.) from the counting mode to the
weighing mode, and back. The weight of the article is not deleted by this.
If an other article has to be counted, go back to the weighing mode with key
and start at point 1. again.
Note : in this program negative counting (after taring) is not possible
The Hi-Lo function offers the feature to do a very quick check on the weight of
series of articles, or to fill constant quantities, within the settable weight ranges.
Two weight values may be entered. These values will be used as upper and
lower limits, indicating that a measured weight value is:
- HI = weight too high
- OK = correct weight
- LO = weight too low
The three LED’s left next to the display indicate the weighing result in red,
green or yellow. Long or short “beep” sounds may be connected to the HI, OK
and LO functions via the User Mode (page 11).
Setting of the weight values is done with key , see next page
On the condition that weight values have been entered, pressing key
starts and stops the HI-LO function, as well as the counting function.
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel +31 36 522 20 30
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax +31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands
Check weighing (in weighing mode only)
Hi-Lo check weighing (in weighing mode only, if selected in the USER mode)
Counting parts
NET
NET
NET
NET
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satex . . SA 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satex . . SA 250 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satex . . SA 250

Satex . . SA 250 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info