50953
6
Zoom out
Zoom in
Previous page
1/20
Next page
pag. 4
Manual SA 250
Start up
PCG/C SA 250 Manual 27-03-07
At start up with the key the display shows briefly: “Lod . . .” (Loading)
During start up the display shows 3 x all the segments of the figures and
the decimal dots, running from left to right and the kg sign.
Next turn the display shows the program number : PSP-n1
After that the scale will automatically set zero, as soon as the reading has
come to an exact standstill. Only after exact standstill the symbol is
shown, followed by the symbol and the display reading will be zero.
After maximum 10 minutes warming up time the measuring system is stabilized
and the scale is ready to be used.
If the display, with an empty weigh platform, does not show a zero reading,
press key .
The zero setting range is limited up to + and - 2% of the scale capacity.
Outside this range, zero setting will not be executed.
If more than 2% zero setting is required, switch the scale off and on again. The
zero setting range is than + and - 10%.
Small deviations from zero (< ½ scale division), are automatically
compensated, so the empty scale will always stay at zero reading. This
procedure is called zero tracking.
The addition of very small weights (< ½ scale division) starting from zero
reading, may cause faulty weight presentation, caused by the zero tracking.
In that case the zero tracking may be switched off via the User Menu (page 8).
Place empty container on the platform and tare to zero with key
After standstill the weight reading sets zero.
The symbol at :
NET shows that a taring has been operated: display
reading now is the net weight.
Taring may be repeated up to the maximum scale capacity.
The tare may be deleted by pressing key with an empty platform.
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel +31 36 522 20 30
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax +31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands
Set zero
Tare (taring is zero setting, possible over the complete scale capacity)
NET
NET
NET
NET
NET
NET
NET
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satex . . SA 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satex . . SA 250 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satex . . SA 250

Satex . . SA 250 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info