50953
4
Zoom out
Zoom in
Previous page
1/20
Next page
Manual SA 250
pag. 2
Technical specifications
PCG/C SA 250 Manual 27-03-07
Start up
Carefully unpack the scale.
Check the presence of:
- weigh platform with digital indicator
- stainless steel pole with locking bolts and bolt spanner
- mains adaptor in carton box
- English user manual
Fix indicator upon the pole and the pole into the foot (lockup bolts)
Put the scale in level position with the level indicator and the
4 leveling feet
Connect the platform cable to the indicator, connect mains adapter
and press the “ON” switch (with an empty weigh platform!)
The scale automatically sets zero and is ready for use now
The built in battery allows the scale to work for maximum 75 hours
without connection to mains supply.
Due to differences in temperature it may last until 10 minutes after switching on before the reading of the weight is
completely accurate.
Place the articles to be weighed carefully on the weigh platform. Prevent for bumping against and overloading of
the weighing platform. The loadcell down under it may be damaged seriously.
Check, if necessary, the accuracy with an accurate calibration weight. Using the calibration procedure (page 13) the
scale may be re-adjusted. Stamped scales are sealed to prevent for illegal adjustments
At first start up the built in battery may be not completely loaded. Re-load the battery by leaving the scale in OFF
position for at least 16 hours with a connected mains adaptor.
Weighing capacities : Capacity and division are user settable via the software.
Legal trade version has 3000 divisions, the High Resolution (HR) version
has up to 15000 scale divisions.
Accuracy : Fulfils the European Weight and Measures regulations (EN 45501) for new
weighing scales:
at a load of: 0 - 500 divisions : deviation <
½ scale division
500 - 2000 divisions : deviation <
1 scale division
2000 - 3000 divisions : deviation <
1½ scale division
The HR version has a deviation of max. 2 divisions.
Environmental : in operation: 0° … + 40°C, in stock: -10° … + 55°C, max. 85% RH.
Construction : Stainless steel platform, ABS housing of indicator, coated aluminum (34 SA)
or steel (46/66 SA) weigh frames, stainless steel pole with cast aluminum foot
Excitation : Mains adaptor 230 VAC 50 Hz 60 mA, output 9 VDC 500 mA,
built in rechargeable battery and charger.
Operation on battery : 75 / 28 hours, without / with display back light switched on.
Battery charging time : At least 20 hours for a complete charge.
Automatic switch off : Settable: auto off after 5, 10, 20, 30 minutes standstill, or no auto off active.
Display back light : Settable: on, off, or automatic on during weighing (display > 0,0 kg).
RS 232 data communication : 2400 / 9600 Bd (settable), 8 data bits, 1 stop bit, no parity,
CR and LF, fixed string 13 bytes, decimal dot and a kg sign included,
9-pole male D-connector, 4 transmission modes.
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel +31 36 522 20 30
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax +31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands
RS connecto
r
Mains adaptor and
p
latform cable connecto
r
Level indicator
Pole foot
Indicator
Pole
Weigh platform
Turnable
console
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satex . . SA 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satex . . SA 250 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satex . . SA 250

Satex . . SA 250 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info