50953
9
Zoom out
Zoom in
Previous page
1/20
Next page
Manual SA 250
pag. 7
PCG/C SA 250 Manual 27-03-07
Four functions of the procedure of data transmission may be selected
in the User Menu:
0. Switched off
1. 1 x printing (or transmission to a PC) after pressing key
Transmission is executed if:
- the reading has standstill at pressing the key ( symbol is on)
- the reading has had a standstill at 0, after the last transmission
- the reading is > 0
After pressing key a short “beep” sounds to confirm the transmission.
A longer “beep” indicates that no transmission will be executed, since there is
no standstill of the weight value, or the reading has not been stable at zero
before (not active in the Hi-Lo mode).
2. automatic 1 x printing (or transmission) after each weighing
Transmission is executed if:
- the reading has come to a standstill ( symbol is on)
- the reading has had a standstill at 0, after the last transmission
- the reading is > 0
- the reading is in the weighing mode
3. continuous transmission
Print of weight:
In the weighing mode only. Transmission speed is about 10 Hz.
Attention: gross negative values are transmitted too.
At loads above the maximum scale capacity the transmission stops.
In this mode the selected extra empty printing lines, before and after the actual
data, are not transmitted.
Printing examples
Print of counting / weighing (HR version): G = gross
N = net
T = tare
QTY … PCS = quantity … pieces
PCW = piece weight in grams
The empty spaces above and below the printed lines may be selected
(max. 9 empty lines) in the User Mode.
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel +31 36 522 20 30
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax +31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands
Printing / sending data
NET
30.240 kg
28.750 kg
7.890 kg
G 20.196 kg
N 20.196 kg
T 0.000 kg
QTY
403
PCS
PCW
50.0699 g
G 5.041 kg
N 4.344 kg
T 0.697 kg
QTY
856
PCS
PCW
5.07199 g
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satex . . SA 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satex . . SA 250 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satex . . SA 250

Satex . . SA 250 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info