699577
26
Zoom out
Zoom in
Previous page
1/60
Next page
24 Programming SATEL
FS27 - programming zone options (BIT)
Each control panel zone has eight associated options which activate additional functions of
the zone. The use of these options depends on the zone reaction type. The control panel
tests only the options relevant to the given zone. For example, it is of no use to activate the
"auto-bypassed after first alarm" option or the "must not be violated on arming" option for the
ARMING zones. Activation of such options has no effect on the zone functioning.
Option No. Signaling
LED LCD
Option
LED LCD
PRIORITY (may not be violated or tampered on arming)
ON
1 1
may be violated or tampered on arming
OFF
CHIME (generates chime signal when disarmed)
ON
2 2
generates no chime signal
OFF
AUTO-RESET 1 (auto-bypassed after first alarm)
ON
3 3
always alarms (when both options 3 and 4 are off)
OFF
AUTO-RESET 3 (auto-bypassed after third alarm)
ON
4 4
always alarms (when both options 3 and 4 are off)
OFF
ABORT DELAY (no violation code reported to monitoring station
during "entry delay")
ON
5 5
violation code reported during "entry delay"
OFF
POWER UP DELAY (zone not supervised for 120 s after control
panel power-up)
ON
6 6
zone supervised immediately after power-up
OFF
RESTORE AFTER BELL (zone violation restore code reported to
monitoring station after alarm ends)
ON
7 7
zone violation restore code reported to monitoring station
immediately (with option 8 also off)
OFF
RESTORE AFTER DISARM (zone restore code reported to
monitoring station after disarming)
ON
8 8
zone restore code reported immediately (with option 7 also off)
OFF
During programming, in the LED keypad the LEDs 9 to 12 show binary the number of zone
for which the options are being programmed.
Note: By default, the option no.1 is active for all the zones, which means that none of the
zones may be violated or tampered during arming.
FS28 - programming individual entry delay (DEC)
An individual "entry delay time" (alarm delay) can be programmed for each zone.
The individual entry delays should only be programmed where different delay times are
required for the particular zones. Otherwise, these times should be equal to zero, and the
delay for all of the zones is programmed in FS6.
The programming consists in entering the times for delayed zones from 00 (then the global
time specified in FS6 is valid) to 99 seconds.
The programmed times only refer to the zones programmed for ENTRY/EXIT, DELAY,
INTERIOR DELAY and DELAY AUDIBLE.
EXAMPLE: (for LED keypad)
programming the entry delay time (alarm delay) for the following zones: zone 4 - delay 30s,
zone 7 - delay 45s, zone 8 - delay 60s.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info