699577
58
Zoom out
Zoom in
Previous page
1/60
Next page
56 Programming SATEL
not used
not used
long backlight on (140s)
long backlight off (40s)
permanent backlight of the keys and the LCD display on
permanent backlight of the keys and the LCD display off
alternative type of menu on
alternative type of menu off
functions assigned to arrow keys enabled
functions assigned to arrow keys disabled
Texts priority parameter determines the way system status is displayed in the text mode. If it
is off all relevant messages are displayed one after another in a closed cycle. If it is on only
the highest priority message is displayed. The following priority levels are assigned by
default (starting with the highest):
1. entry delay,
2. fire alarm,
3. burglary alarm,
4. armed (or silent armed)
5. fire alarm occurred,
6. burglary alarm occurred,
7. exit delay.
The option „Alternative type of menu” defines whether scrolling through the keypad menu by
means of the keys and will also change the arrow position on the display, or not.
Reset Defaults
The function restores default parameters of keypad.
Test
This function enables a functional test of the keypad to be carried out and also restores the
default settings of the keypad. To preserve your own parameters it is necessary to write them
into computer before testing, and after testing they should be again programmed from the
computer.
After the function is started, the test is first performed on the display, where all items are to be
switched on. Pressing the key [
*
] results in switchover to the test of keypad backlight and
correct lighting of LEDs. The next stroke of the key [
*
] starts the keypad test. Pressing all the
keypad keys will test the keypad memory, which is signaled on the display by the message:
Wait for the end of the PCF test”. Then, the following items are tested: status of the keypad
zones, tamper circuit, and data transmission. During the tests, you can make and break the
inputs and the tamper contact, to make sure their operation is correct. All the tests done, the
following message will appear on the display: „Keypad ok, press
*
”. Pressing the key [
*
], or
switching the power off and then again on will result in a restart of the keypad.
Note: After completion of the test, the function FS124 must be started.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info