699577
27
Zoom out
Zoom in
Previous page
1/60
Next page
SATEL CA-10 25
[2][8] [#] - call the function
[#] - skip programming entry delay for zone 1
[#] - skip programming entry delay for zone 2
[#] - skip programming entry delay for zone 3
[3][0] [#] - program the entry delay for zone 4
[#] - skip programming entry delay for zone 5
[#] - skip programming entry delay for zone 6
[4][5] [#] - program the entry delay for zone 7
[6][0] [#] - program the entry delay for zone 8
[
*
] - exit the function - omit programming entry delay for the other zones
FS29 - programming maximum zone violation times
The FS29 function defines the boundary value of zone violation time which cannot be
exceeded, unless the zone detector is faulty. Information on the trouble is recorded in the
control panel event log and sent to the monitoring station. It can also be signaled on the
output selected for ZONE TROUBLE.
The programming procedure is similar to that in the FS24 function (programming the zone
sensitivity).
The violation time is set within the range of 0 to 255 seconds. When time 0 has been
programmed, the function is inactive.
EXAMPLE: (for LED keypad)
programming the maximum violation time for the zones 2 (60 seconds) and 4 (180 seconds)
[2][9] [#] - call the function
[0] [#] - disable the trouble check for the zone 1 (by default, the trouble check for all zones is
disabled, so you can skip the zones for which this parameter is not programmed, by
pressing the [#] key)
[6][0] [#] - set the time for the zone 2
[#] - skip programming the zone 3
[1][8][0] [#] - set the time for the zone 4
[
*
] - quit the function - skip time programming for the other zones.
Note: The violation time is only checked for the "alarm zones" (reaction type from 00 to 11).
FS30 - programming the zone no violation time
This function defines the time after which the absence of a given zone violation will be
recognized by the panel as a trouble condition (e.g. a faulty or obstructed detector). The time
of no violation is only counted when the zone is disarmed.
Information on the zone trouble is saved in the event log, and can be sent to the monitoring
station and to the output selected for ZONE TROUBLE.
This parameter can be defined individually for each zone in the same way as in the FS29,
within the range of 0 to 255 hours. Having programmed 0 means that the zone no violation
time monitoring is disabled.
Note: The no violation time is only checked for the "alarm zones" (reaction type from 00 to
11).
Functions programming output parameters
FS31 - programming OUT1 output
The function makes it possible to define basic parameters regarding the OUT1 output:
output type (determines in which conditions the output will be activated),
output operation time,
operation options (e.g., "polarity").
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info