710374

Roland DJ-505 Manual

15
Zoom out
Zoom in
Previous page
1/32
Next page
15
Operating the DJ-505
Pattern Operations (PATTERN)
You can press the performance pads to switch TR-S patterns (p. 18).
1. Hold down the [SHIFT] button and press the [TR] button to
make the button light in green.
Pattern mode is selected.
Patterns are assigned to the performance pads as follows.
Pattern
1
Pattern
2
Pattern
3
Pattern
4
Pattern
5
Pattern
6
Pattern
7
Pattern
8
Press the [SHIFT] button to select patterns 9–16.
Pattern
9
Pattern
10
Pattern
11
Pattern
12
Pattern
13
Pattern
14
Pattern
15
Pattern
16
2. Press a performance pad, or hold down the [SHIFT] button and
press a performance pad, to select the pattern that you want
to play.
5 If you had been playing a pattern, the pattern nishes playing; then the
pattern that’s assigned to the performance pad that you pressed starts
playing.
5 By holding down a performance pad and pressing the performance
pad that you want to play next, you can play back the selected
performances consecutively.
TR Velocity Operations
The functionality is the same as in TR mode, but when you press a pad in
the upper row, the volume of the instrument changes depending on how
strongly you press the pad.
1. Press the [TR] button twice to make the button light in orange.
TR velocity mode is selected.
BD SD CH OH
LT HC RS RC
2. Press a performance pad.
You hear the instrument. The volume of the instrument changes
depending on how strongly you press the pad. The stronger you press the
pad, the louder the instrument’s volume.
Serato Sampler Operations (SAMPLER)
You can use the performance pads to play songs (samples) that are loaded
into Serato Sampler’s sample slots.
1. In Serato DJ, click the [Sampler] key to access the Samples
panel.
2. Press the [SAMPLER] button to make it light in magenta.
Sampler mode is selected.
3. Use the PARAMETER [−] [+] buttons to switch the Serato
Sampler’s banks.
The Serato Sampler has four banks (A–D), and each bank has eight slots.
4. Drag and drop songs into the Sampler panel to load a sample
into each slot of the Sampler panel.
The sampler settings and the loaded samples are saved.
* You can also load a sample by using the rotary selector to select a
sample and then pressing a performance pad while holding down the
[SHIFT] button.
5. Press a performance pad.
The sample of the slot that’s assigned to the pad you pressed is played.
Slot 1 Slot 2 Slot 3 Slot 4
Slot 5 Slot 6 Slot 7 Slot 8
* The type of playback changes depending Serato Sampler’s playback
mode. For details, refer to the Serato DJ owner’s manual.
MEMO
If you hold down the [SHIFT] button and press the performance pad,
sample playback stops.
Pitch Play Operations (PITCH PLAY)
The pitch of the loaded song can be changed in semitone steps.
1. Press the [SAMPLER] button twice to make the button light in
green.
Pitch play mode is selected.
2. Press a performance pad to change the pitch.
No
change
Semitone
down
Pitch is raised in semitone steps
Pitch is lowered in
semitone steps
Velocity Sampler Operations
The functionality is the same as in sampler mode, but when you press a
pad, the sample’s playback volume changes depending on how strongly
you press the pad.
1. Hold down the [SHIFT] button and press the [SAMPLER] button
to make the button light in purple.
Velocity sampler mode is selected.
2. Press a performance pad.
The sample of the slot assigned to the pad you press is played.
The more strongly you press the pad, the louder the sample’s playback
volume.
Slip Operations
If slip is on, the song continues to progress in the background even during
scratch play, loop playback, or hot cue playback.
When you cancel scratch play, loop playback, or hot cue playback, the song
playback resumes from the position to which playback had progressed
until that time.
This allows a variety of DJ performance techniques without stopping the
ow of the song.
1. Press the [SLIP] button to make the button light.
Slip mode is selected.
The button blinks while the song is progressing in the background.
Song Analysis
Song analysis begins when you press the DJ-505’s [LOAD] button to load
a song into a deck, but if you’re using Serato DJ as an oine player (i.e.,
without the DJ-505 being connected), you can analyze songs ahead of
time.
If analysis is nished for a song, the BPM and waveform are displayed
immediately after you load that song into a deck.
For details on how to analyze songs with the oine player, refer to the Serato DJ
owner’s manual.
* Depending on the number of songs, analysis might take some time.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-505 in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-505

Roland DJ-505 User Manual - German - 32 pages

Roland DJ-505 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info