710374

Roland DJ-505 Manual

13
Zoom out
Zoom in
Previous page
1/32
Next page
13
Operating the DJ-505
Performance Pad Operations
Hot Cue Operations (HOT CUE)
By specifying a hot cue, you can instantly play back from the specied
location.
You can specify up to eight hot cues for each song.
1. Press a [HOT CUE] to make the button light in white.
Hot cue mode is selected.
2. During playback or while paused, press a performance pad
that is unlit.
A hot cue is assigned to the pad that you pressed.
Hot cues (1–8) are assigned to the performance pads as follows.
HOT CUE
1
HOT CUE
2
HOT CUE
3
HOT CUE
4
HOT CUE
5
HOT CUE
6
HOT CUE
7
HOT CUE
8
3. Press a performance pad that is lit (i.e., a pad to which a hot cue
is assigned).
Playback starts from the specied location.
MEMO
If you hold down the [SHIFT] button and press a performance pad, the
hot cue of the pad you pressed is cleared.
Cue Loop Operations (CUE LOOP)
When you press a performance pad, the auto loop point moves to the cue
point of the pad that you pressed, and auto loop playback occurs.
1. Hold down the [SHIFT] button and press the [HOT CUE] button
to make the button light in blue.
Cue loop mode is selected.
2. During playback, press a performance pad that’s lit.
Auto loop playback starts with the hot cue that’s assigned to the pad you
pressed.
The loop length is the same as the auto loop beat setting.
MEMO
If you press a pad that’s unlit, hot cue is specied, and auto loop
playback starts immediately.
Loop in points are assigned to the performance pads as follows.
Loop 1 Loop 2 Loop 3 Loop 4
Loop 5 Loop 6 Loop
7 Loop 8
3. Adjust the loop playback parameters.
5 During loop playback, press the PARAMETER [−] button
The loop playback length is halved. You can obtain the same result by
pressing the [1/2X] button in the LOOP area.
5 During loop playback, press the PARAMETER [+] button
The loop playback length is doubled. You can obtain the same result by
pressing the [2X] button in the LOOP area.
5 During loop playback, hold down the [SHIFT] button and press the
LOOP [1/2X] button
Move to the previous loop, keeping the loop length the same.
5 During loop playback, hold down the [SHIFT] button and press the
LOOP [2X] button
Move to the next loop, keeping the loop length the same.
5 Hold down the [SHIFT] button and press the same performance pad
Return to the loop in point and continue loop playback.
4. Press the same performance pad once again.
Loop playback is cancelled.
Roll Operations (ROLL)
When you press a performance pad, a roll continues playing in time with
the length (beat) that’s assigned to each pad, as long as you continue
holding down the pad.
The song continues progressing in the background even while the roll is
playing.
When you cancel roll playback, song playback resumes from the location to
which the song had progressed while the roll was being played.
NOTE
Roll can only be used during the song playback.
1. Press the [ROLL] button to make the button illuminate in light
blue.
Roll mode is selected.
2. Use the PARAMETER [−] [+] buttons to select the lengths
(beats) that are assigned to the pads.
Each time you press a button, you cycle through four sets.
1/32 beat 1/16 beat 1/8 beat 1/4 beat
1/2 beat 1 beat 2 beats 4 beats
1/16 beat 1/8 beat 1/4 beat 1/2 beat
1 beat 2 beats 4 beats 8 beats
1/8 beat 1/4 beat 1/2 beat 1 beat
2 beats 4 beats 8 beats 16 beats
1/4 beat 1/2 beat 1 beat 2 beats
4 beats 8 beats 16 beats 32 beats
The computer screen shows the selected set.
3. Hold down a performance pad.
A roll plays at the beat that’s assigned to the pad you pressed.
MEMO
During roll playback, you can press the LOOP [1/2X] button or LOOP [2X]
button to change the beat of the currently-playing roll.
4. Take your nger o the performance pad.
Song playback resumes from the location to which the song had
progressed while the roll was being played.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-505 in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-505

Roland DJ-505 User Manual - German - 32 pages

Roland DJ-505 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info