710374

Roland DJ-505 Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
14
Operating the DJ-505
Slicer Operations (SLICER)
Slicer divides the specied region into eight, and assigns the divided
regions to the performance pads. While you hold down a performance pad,
the sound of the region assigned to that pad plays as a loop.
The song continues progressing in the background even while looping.
When you cancel loop playback, song playback resumes from the location
to which the song had progressed during loop playback.
NOTE
5 Slicer can only be used during the song playback.
5 You can’t use the slicer on a song for which the beat grid is not
specied. For details on the beat grid, refer to the Serato DJ owner’s
manual.
1. Hold down the [SHIFT] button and press the [ROLL] button to
make the button light in red.
Slicer mode is selected.
MEMO
If you hold down the [SHIFT] button and press the [ROLL] button twice
to make the button light in blue, slicer loop mode is selected.
2. Hold down the [SHIFT] button and use the PARAMETER [−] [+]
buttons to select the length (beats) of the specied region.
The setting changes each time you press the button.
The length of the specied region can be set to 2 beats, 4 beats, 8 beats,
16 beats, 32 beats, or 64 beats.
The eight divided regions are assigned to the performance pads as
follows.
1 8765432
Region 1 Region 2 Region 3 Region 4
Region 5 Region 6 Region 7 Region 8
3. Use the PARAMETER [−] [+] buttons to specify the slicer’s
quantize setting.
The quantize setting changes the length of loop playback that occurs
when you hold down a pad.
You can choose from four types of quantize setting.
Example:
If quantize is set to 1:
The entire region assigned to the pad you press is played as a loop.
If quantize is set to 1/2:
The rst 1/2 of the region assigned to the pad you press is played as a
loop.
4. Hold down a performance pad.
While you hold down the pad, the length that you specied by the
quantize setting is continuously played as a loop.
5. Release the performance pad.
Song playback resumes from the location to which the song had
progressed during loop playback.
Using slicer mode and slicer loop mode
Slicer mode
When the playback location progresses to the end of the region that was
divided into eight, the region on the screen shifts to show the next eight
divisions, and that region divided into eight is assigned to the pads.
1 8765432 1 8765432
Slicer loop mode
When the playback location progresses to the end of the region that was
divided into eight, the playback location returns to the beginning of the
currently-specied region.
1 8765432 1 8765432
Saved Loop Operations
You can save loops in Serato DJ’s loop slots, and recall a saved loop.
1. Press the [ROLL] button twice to make the button light green.
Saved loop mode is selected.
2. During loop playback, press a performance pad.
The loop is assigned to Serato DJ’s loop slot.
Slot 1 Slot 2 Slot 3 Slot 4
Slot 5 Slot 6 Slot 7 Slot 8
3. Hold down the [SHIFT] button and press a performance pad.
Playback returns to the beginning of the loop and continues.
5 During loop playback, press the LOOP [1/2X] button
The loop playback length is halved.
5 During loop playback, press the LOOP [2X] button
The loop playback length is doubled.
5 During loop playback, hold down the [SHIFT] button and press the
LOOP [1/2X] button
The loop length remains the same, and you move to the previous loop.
5 During loop playback, hold down the [SHIFT] button and press the
LOOP [2X] button
The loop length remains the same, and you move to the next loop.
* If you change the length of the recalled loop, the loop settings are
saved (overwritten).
4. Press the same performance pad once again.
Loop playback is cancelled.
TR Operations (TR)
You can play TR instruments.
1. Press the [TR] button to make the button light red.
TR mode is selected.
Instruments are assigned to the performance pads as follows.
BD SD CH OH
LT HC RS RC
2. Press a performance pad.
You hear the instrument.
MEMO
You can use the PARAMETER [–] [+] buttons to specify the velocity.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-505 in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-505

Roland DJ-505 User Manual - German - 32 pages

Roland DJ-505 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info