710374
30
Zoom out
Zoom in
Previous page
1/32
Next page
30
Using Serato DVS
* If the calibration deck is not shown, go to the SETUP screen’s
“EXPANSION PACKS” tab, select [Vinyl/CDJ Control], and make sure that
there is a check mark on “Enable Vinyl/CDJ control.
* If the green circle is not shown on the scope, check the following items.
5 The turntable/DJ player is correctly connected with the DJ-505.
5 The ground wire of the turntable is connected to the DJ-505’s
PHONO GROUND terminal.
5. Make adjustments so that the green circle is a perfect circle.
L/R Balance Compensates for distortion in the vertical direction.
P/A Balance Compensates for distortion in the horizontal direction.
Zoom Enlarges the circle in the scope.
Noise Sensitivity If the control signal is below the value specied here, it is treated as noise.
Estimate
With the needle placed on the record of the stopped turntable, or with the
DJ player paused or stopped, holding down this button moves the “Noise
Sensitivity.
* For details, refer to the Serato DJ owner’s manual.
6. Repeat steps 1–5 to adjust the control signal of all turntables or
DJ players.
Playing a Song with DVS
1. In the virtual deck screen, click the VINYL control mode button
to select either REL mode or ABS mode.
2. Import a song as described in “Importing a Song (p. 11).
3. Load the song as described in “Loading a Song” (p. 11).
4. Operate your turntable or DJ player to play back the control
record or CD.
The song that’s loaded into the deck plays.
5. Move the channel fader upward and turn the [TRIM] knob
toward the right to adjust the volume.
Adjust the volume so that the channel level indicator’s OVER segment
does not light.
6. Turn the [MASTER LEVEL] knob toward the right to adjust the
level of the speakers.
Functions Available When Using DVS
When using DVS, the available functions are limited as follows.
Function REL mode ABS mode
Performance pads
Hot cue
(
(*1)
Roll
(
Slicer
(
Slicer loop
(
Sampler
( (
Velocity sampler
( (
Cue loop
(
Saved loop
(
Saved ip
(
Loop
Loop
(
Loop active
(
Loop half/double/shift
(
Loop in
(
Loop slot select
(
4 beat loop
(
Loop out
(
Re-loop
(
Loop exit
(
Transpose
Play/Pause/Stutter
Temporary cue
(
Sync
(
Jog dial
Scratch
Pitch bend
(
Skip
(
Tempo control
Tempo slider
Key lock
( (
Tempo reset
Tempo range
Flip
Flip rec
(
Flip loop
(
Flip start
(
Flip on/o
(
Flip slot select
(
Flip save
(
Others
Censor
(
Reverse play
Rec
( (
(*1) Only hot cue settings are possible. Recall is not possible.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-505 in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-505

Roland DJ-505 User Manual - German - 32 pages

Roland DJ-505 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info