710374

Roland DJ-505 Manual

16
Zoom out
Zoom in
Previous page
1/32
Next page
16
Operating the DJ-505
Eect Operations
Serato DJ has two eect units (FX1, FX2) which you can use with the
selected deck.
DJ-FX panel
When you click “FX” in the upper left of Serato DJ’s main screen, the DJ-FX
panel opens.
Multi FX mode
You can select up to three eects for each eect unit.
1 1 1 2 3
4 5 4 5 4 5
Single FX mode
You can select one eect for each eect unit, and control multiple
parameters of the selected eect.
1
2 3
4 5 6 6 6 6
1
Currently selected eect type
2
Time at which the eect is applied
3
Number of the deck that uses the eect unit is highlighted
4
Eect on/o status (highlighted when on)
5
Eect depth
6
Eect parameters and settings
Multi FX Mode Operations
1. Hold down the [SHIFT] button and press the [TAP] button to
select multi FX mode.
Each time you press the button, you alternate between multi FX mode
and single FX mode.
2. In the CHANNEL ASSIGN area of the deck (channel) that you
want to operate, press the [1] or [2] button to select the eect
unit that you want to use.
In the DJ-FX panel of the Serato DJ screen, the number of the deck that
uses the eect unit is highlighted.
MEMO
By pressing the [TR/SAMPLER] button you can apply an eect to the
TR-S/sampler sound.
* In Serato DJ’s Sampler panel, set OUTPUT to “A.”
3. Hold down the [SHIFT] button and press an eect button to
select the eect type.
The eect type changes each time you press the button.
4. Press the eect button to turn the eect on (button lit).
5. Use the eect parameter knobs to adjust the eect depth.
6. Use the [BEATS] knob to adjust the time at which the eect is
applied.
* If you press the knob, the setting is set to “1.”
MEMO
By tapping the [TAP] button at the desired interval, you can set the
value that is the basis for the time at which the eect is applied.
Single FX Mode Operations
1. Hold down the [SHIFT] button and press the [TAP] button to
select single FX mode.
Each time you press the button, you alternate between single FX mode
and multi FX mode.
2. Press the [1] or [2] button of the deck (channel) that you want
to operate, to select the eect unit that will be used.
In the DJ-FX panel of the Serato DJ screen, the number of the deck that
uses the eect unit is highlighted.
MEMO
By pressing the [TR/SAMPLER] button you can apply an eect to the
TR-S/sampler sound.
* In Serato DJ’s Sampler panel, set OUTPUT to “A.”
3. Hold down the [SHIFT] button and press the eect 1 button to
select the eect type.
It does not matter which eect button you press.
The eect type changes each time you press the button.
4. Press the eect 1 button to turn the eect on (button lit).
5. Press the eect 2 or 3 button to switch the value of the eect
parameters.
6. Use the eect parameter 2 or 3 knobs to adjust the value of the
eect parameters.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-505 in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-505

Roland DJ-505 User Manual - German - 32 pages

Roland DJ-505 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info