710374

Roland DJ-505 Manual

17
Zoom out
Zoom in
Previous page
1/32
Next page
17
Operating the DJ-505
7. Use the eect parameter 1 knob to adjust the eect depth.
8. Use the [BEATS] knob to adjust the time at which the eect is
applied.
* If you press the knob, the setting is set to “1.”
MEMO
By tapping the [TAP] button at the desired interval, you can set the
value that is the basis for the time at which the eect is applied.
Changing the Eect Tempo
Serato DJ lets you set the tempo of the eect in either of two ways.
Auto tempo mode (default setting)
The eect tempo is determined based on the BPM value of the song.
Manual tempo mode
The basic tempo (BPM value) for the eect is set by the interval at which
you tap the [TAP] button.
Switching the tempo mode
5 In auto tempo mode, tap the [TAP] button three or more times to
switch to manual tempo mode.
5 In manual tempo mode, long-press the [TAP] button to reset the
specied tempo and switch to auto tempo mode.
Recording
You can use Serato DJ’s recording functionality to record sounds that you’ve
mixed on the DJ-505.
* For details, refer to the Serato DJ owner’s manual.
1. In Serato DJ, click the [REC] key to access the REC panel.
2. Click [REC] to start recording.
3. To stop recording, click [REC] once again.
4. To save, enter a le name in the text entry eld and click [Save].
Inputting Sound from an External Device
Audio from devices such as a DJ player or turntable (analog) can be input
directly to the rear panel INPUT (CH 1, CH 2) jacks, and mixed by the
DJ-505’s mixer section.
You can also use Serato DJ’s eect units to apply eects to the external
audio inputs.
In “System Settings” (p. 22), you can specify a dedicated eect (reverb,
delay) for the audio that's input from the mic connected to the MIC IN jack.
Inputting Sound from a DJ Player
1. Connect your DJ player or other line-level device to any of the
INPUT (CH 1, CH 2) jacks.
2. As appropriate for the channel to which your line-level device
is connected, set the corresponding front panel [CH 1] or [CH 2]
switch to “LINE.”
3. Use the [TRIM] knob and channel fader to adjust the output
level.
5 You can use the [HI], [MID], and [LOW] knobs to adjust the volume of
the high, mid, and low-frequency regions.
5 You can use the [FILTER] knob to apply a lter.
5 You can operate the eect section to apply Serato DJ’s eects.
Inputting Sound from a Turntable
1. Connect your turntable to either of the INPUT jacks (CH 1 or CH
2).
2. As appropriate for the channel to which your turntable is
connected, set the corresponding front panel [CH 1] or [CH 2]
switch to “PHONO.”
3. Use the [TRIM] knob and channel fader to adjust the output
level.
5 You can use the [HI], [MID], and [LOW] knobs to adjust the volume of
the high, mid, and low-frequency regions.
5 You can use the [FILTER] knob to apply a lter.
5 You can operate the eect section to apply Serato DJ’s eects.
Inputting Sound from a Mic
1. Connect your mic to the MIC IN jack.
2. Use the rear panel [MIC SENS] knob to adjust the mic input
sensitivity.
3. Use the front panel [MIC LEVEL] knob to adjust the audio
output level of the mic.
5 In “System Settings” (p. 22), you can specify dedicated eects (reverb,
delay) for the mic input.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-505 in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-505

Roland DJ-505 User Manual - German - 32 pages

Roland DJ-505 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info