538892

Zelmer 13Z011 Manual

212
Zoom out
Zoom in
Previous page
1/228
Next page
212
CAUTION! The adjustments can be made only when the grinder is operating. Avoid extreme adjustment settings
(e.g. setting “1” and “8”). The modifi ed grinding level setting can only be noticeable after brewing three or four
espresso cups, as there might still be coffee remains in the grinder from the previous grinder setting.
CAUTION! Never turn the knobs (10) and (11) using force when the grinder is not operating. This may cause dam-
age to the coffee maker.
The bean coffee container is equipped with a built-in “grinding blade protection” which is a safety mechanism. It pro-
tects undesirable objects e.g. fi ngers, etc. from entering the grinder. While using big or oily coffee beans the grinder unit
might be temporarily blocked. In such a case switch off the coffee maker, remove the remaining coffee beans, clean the
bean container and the area around the grinder. However, it is recommended to use medium size and less oily beans for
the proper functioning of the grinder.
7.2. Ground coffee
CAUTION! The ground coffee container can only be fi lled with ground coffee. Never fi ll the bean coffee container
with any other products, as it may cause damage to the appliance.
Open the ground coffee container lid ● (9).
Fill the container ● (9a) with 1 measuring spoon of ground coffee using the measuring spoon with the brush (24).
NOTE! If you accidentally exceed the recommended amount of ground coffee, it will not infl uence the coffee brew-
ing effect. However, try not to fi ll the ground coffee container (9a) with two measuring spoons.
Close the ground coffee container lid ● (9).
8. Cup warming
Using a cup warmed to an appropriate temperature before the coffee brewing proc-
ess will increase the taste of the coffee as well as the formation of a rich froth.
There are 2 ways of warming the cups. The fi rst way is to warm the cup using hot
water which can be obtained from the steam/hot water nozzle (16) proceeding ac-
cording to section 13.
The second way is to place the cup before the planned coffee brewing process on
the warming plate (7) on the top of the coffee maker (fi g. 9).
9. Emptying the drip tray
When the drip tray (19) is full of water, the red drip tray full indicator (20) will rise above the drip tray grill (21).
Remove the drip tray unit (19) together with the drip tray grill (20) from the coffee maker and pour out the water. Reinsert
the elements back to the coffee maker.
10. Emptying the dregs box
Check the dregs box (22) periodically. In order to do so, just observe the box after opening the service door (15). When
the dregs box (22) is full with used coffee, remove the drip tray unit from the coffee maker. Remove the dregs box (22) and
empty its content. Next, rinse the dregs box under running water, dry it and insert it back to the drip tray unit. Reinsert the
elements back to the coffee maker.
NOTE! If the dregs box (22) is full the message EMPTY DREGS BOX will appear on the LCD display.
11. Operating the coff ee maker SELF-TEST
Fill the water tank according to ● section 6.
Check if the brewing head unit ● (14), the dregs box (22) and the drip tray (19) together with the drip tray grill (21) are in
their proper places. If not, assemble these parts properly.
Plug in the appliance. ●
Switch on the appliance by setting the switch in the position ● I.
The appliance will automatically switch to the testing mode. The message ● SELF-TEST will appear on the display dur-
ing test mode. During the appliance test water may drip from the coffee spout (17). This is a normal situation.
When the appliance reaches the appropriate temperature, the message ● READY TO BREW will appear on the display.
12. Preparing coff ee
The appliance is ready to use when the message READY TO BREW appears on the display.
12.1. Preparing a small cup of coffee
Place a cup under the coffee spout (17). Adjust the height of the spout (17) to the size of the cup. Fill the bean coffee con-
tainer (4) or the ground coffee container (9a) with an appropriate type of coffee according to point 7, set the type of coffee
using the button (F) (see section 3F). Make sure there is water in the tank (3). Press the (A) button once. The
message 1 SMALL CUP COFFEE will appear on the display together with the currently set capacity in ml and the brewing
process will start immediately. After fi lling the cup with coffee, the message 1 SMALL CUP COFFEE will disappear from
the display and the message READY TO BREW will appear on the display.
Fig. 9
… 212 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 13Z011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 13Z011 in the language / languages: English, Polish as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info