538892

Zelmer 13Z011 Manual

211
Zoom out
Zoom in
Previous page
1/228
Next page
211
Fig. 7
Plug in the appliance. Set the switch ● (2) in the position I. Due to the fact that the default language is English, all mes-
sages on the display will be displayed in this language. After switching the coffee maker on the message WELCOME
will appear on the display and after a while the appliance will start the testing procedure. The message SELF-TEST will
appear on the LCD – see section 11. If for any reasons the user forgets to fi ll the tank (3) with water, the message FILL
THE TANK WITH FRESH WATER will immediately appear on the display and the appliance will stop the testing proc-
ess. Proceed according to chapter 6 and the appliance will automatically fi nish the test. After the end of the testing proc-
ess, the message READY TO BREW will appear on the display which indicates that the coffee maker is ready for further
operation. At this point the user may change the language settings according to the instructions in section 16.2.
Place a container under the steam/hot water nozzle ● (16) and not pressing any buttons turn the knob (13) to the position
for about 30 s. Hot water will come out of the nozzle (16). Next, set the knob (13) in the OFF position and perform
the “brewing process with the use of only fresh water twice” proceeding according to section 12.1 or 12.2 or 12.3
with the use of ground coffee. Remember not to use ground coffee in this process. It is recommended to perform
the “brewing process with the use of only fresh water twice” in case of using the appliance the next day in order to
clean it and remove the coffee remains.
6. Filling the water tank
CAUTION! Fill the water tank (3) only if the appliance is unplugged. A built-in valve in the lower part of the water
tank prevents the water from leaking.
Open the water tank lid ● (5).
Pull the handle upwards to take out the water tank ● (3).
Fill the water tank with fresh, cold water; ● do not exceed the MAX level.
Put the tank ● (3) back and lock it into place.
Close the water tank lid ● (5).
The water tank can also be fi lled without the necessity of taking it out of the coffee maker, e.g. by pouring water from a jug. ●
WARNING! Do not use the coffee maker with an empty water tank (3). Make sure there is water in the tank (3) be-
fore starting the coffee brewing process. Never fi ll the water tank (3) with hot water. For hygienic reasons never
leave cold water in the water tank for a longer period of time.
7. Dosing coff ee
7.1. Bean coffee
CAUTION! The bean coffee container can only be fi lled with coffee beans. Never fi ll
the bean coffee container with any other products, as it may cause damage to the
appliance.
Open the bean coffee container lid ● (6).
Fill the coffee bean container ● (4) with coffee beans (a moderate amount).
Close the bean coffee container lid ● (6).
ATTENTION! Make sure the coffee beans are fresh. It is recommended to use only
espresso roast coffee and to store the coffee in a tight container in a cool and dry
place.
If the espresso fl ows too quickly during the brewing process, the beans are ground too coarsely; if the espresso fl ows too
slowly, the beans are ground too fi nely. Set the grinding level according to your taste using the initial (10) and precise (11)
adjustment knob (fi g. 8). The adjustment knob (10) is equipped with the bean coffee grinding level scale. Number “1” indi-
cates the “fi nest grinding level”, the number “8” indicates “coarsest grinding level”.
The coffee grinding level setting recommended by the manufacturer is between “4” and “5”.
However, if the coffee fl ows too quickly, set knob (10) to a fi ner grinding level e.g. “3” or “4”.
If the coffee fl ows too slowly, set knob (10) to a coarser grinding level e.g. “6” or “7”.
You can precisely set the grinding level using the knob (11). Always perform the precise adjustment after the initial adjust-
ment. Adjustments made using those 2 knobs will change the taste of the brewed coffee.
Fig. 8
… 211 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 13Z011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 13Z011 in the language / languages: English, Polish as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info