538892
209
Zoom out
Zoom in
Previous page
1/228
Next page
209
D. Steam button /menu up button
When the message READY TO BREW appears on the display press the button. The control lamp will light indicat-
ing that the coffee maker is warming up. The message COFFEE STEAM will appear on the display. The coffee
maker will warm up to the set temperature and will switch to the steam mode. The message READY TO USE STEAM
will appear on the display. If you press this button again, the control lamp will go off and the message STEAM
COFFEE will appear on the display indicating that after a xed period of time the coffee maker will return to the coffee
brewing mode. The message READY TO BREW will appear on the display.
This button is also used to rewind the menu up in the programming mode, that is after pressing the MENU (OK) button.
WARNING! The steam/ hot water nozzle (16) and the water are very hot. Be careful not to burn yourself. Always
use a cloth to handle the steam/hot water nozzle (16). Never block the steam/ hot water nozzle (16) inlet.
E. MENU button (OK)
When the message READY TO BREW appears on the display press the MENU (OK) button once. The coffee maker
will start to operate in the programming mode. The button will light after pressing it. The display will show the menu
with the following messages: ECONOMY MODE, LANGUAGE, TEMPERATURE, PREBREWING, BREWING TIME,
WATER HARDN., DESCALING, NO. OF CUPS, CLOCK, DEFAULT.
To save the changes press the MENU (OK) button.
F. Bean coffee/ground coffee/menu down button / .
When the message READY TO BREW appears on the display press the button. The message COFFEEPOWDER
will appear on the display under the message READY TO BREW. It means that the coffee maker is ready to brew
ground coffee. Press the button the message COFFEEPOWDER will disappear. It means that the coffee maker
is ready to brew bean coffee. This button is also used to rewind the menu down in the programming mode, that is after
pressing the MENU (OK) button.
ATTENTION! The function with the use of ground coffee enables to prepare only one cup of coffee (small, medi-
um or large). Never add more than ONE measuring spoon of ground coffee to the ground coffee container (9a).
NOTE!
It is possible to immediately stop the coffee brewing process. In order to do so, use the buttons (A) , (B) or
(C) respectively while brewing a small, medium or large cup of coffee. Remember that in case of brewing bean
coffee, it is possible to stop the brewing process only after the coffee grinding process is complete.
4. Brewing head unit description (14)
The brewing head unit (14) ( g. 3) consists of the lower (14f) and upper (14e) casing, the brewing chamber (14d), the
screw lever (14c), the coffee delivering pipe (14b) and the D-shaped handle (14a). The main elements of the head are: the
upper (14f) and lower casing (14e), the screw lever (14c) is connected with the motor enabling to control the brewing head
unit (14) in order to brew espresso.
Fig. 3
209


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 13Z011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 13Z011 in the language / languages: English, Polish as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info