647898

Yupiteru MVT-7100 Manual

6
Zoom out
Zoom in
Previous page
1/16
Next page
Use the ad-hoc approach
This approach allows you to change one or more of the individual MHz digits of the current frequency.
Press FUNC + MHz. Use the arrow keys to select the digit to be changed (it will blink faster than the other
digits). Press the appropriate number key or use the rotary control to select it. Repeat as necessary to
change any other digits. Press ENT to finish entry or C/AC to cancel the changes.
Regardless of how you change the frequency, be sure to verify the receive mode and step size are set
appropriately.
Changing receive mode
1. Press FUNC + MODE
2. Use rotary control or arrow keys to select receive mode
3. Press ENT to accept change or C/AC to cancel
Changing step size
1. Press STEP
2. Use rotary control or arrow keys to select step size
3. Press ENT to accept change or C/AC to cancel
NOTE: Each receive mode keeps track of its own step size. If you are going to change the receive mode
and step size, change the receive mode first since it might recall the step size you need.
Programming Memory
Once a favourite frequency has been entered in VFO mode, it can be programmed into one of the 1000
memory channels (0-999) or the priority channel (1000).
When frequency data is copied from a VFO to a memory channel, a specific channel number can be
specified or the current memory channel can be used.
To copy to a specific memory channel
1. Enter the 3-digit channel number (0-999)
2. Press FUNC + MW
3. A double-beep is heard
To copy to the current memory channel
1. Press FUNC + MW
2. A double-beep is heard
NOTE : The current memory channel can be noted by pressing MR to enter Memory mode, noting the
channel number, then pressing MR to return to VFO mode.
NOTE : When a VFO is copied to memory, the following settings are also copied to that memory channel
1. Frequency
2. Step size
3. Receive mode
Each time a memory write (copying VFO to memory) is performed, the current memory channel is
incremented by one. To write successive memory channels, simply enter the frequency data and use the
method to copy this frequency to the current memory channel.
When frequency data is copied from a VFO to a priority channel, a memory channel number of 1000 must
be specified.
To copy to the priority channel
1. Enter 1000
2. Press FUNC + MW
3. A double-beep is heard
Searching
Searching for new frequencies can be performed using the VFO frequency as the starting point. Refer to
Searching Modes for further details.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yupiteru MVT-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yupiteru MVT-7100 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yupiteru MVT-7100

Yupiteru MVT-7100 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info