647898
15
Zoom out
Zoom in
Previous page
1/16
Next page
Beep
The MVT-7100 sounds a beep tone each time a key is pressed. This helps to provide audible feedback
during radio operations. Shipped from the factory, the beep tone is enabled which can be verified by the
presence of the BEEP indicator. For more discreet operations, it may be necessary to disable this feature.
To disable the beep tone
1. Press FUNC2 + BEEP
2. The BEEP indicator disappears
To enable the beep tone
1. Press FUNC2 + BEEP
2. The BEEP indicator appears
Delay
During a scan or search operation, after a transmission ends, there will be a two second delay before the
scan/search is resumed. This delay allows for a response to be heard. To increase this delay time to four
seconds, the Delay function is used.
To enable Delay
1. Press FUNC + DELAY
2. The DLY indicator appears
To disable Delay
1. Press FUNC + DELAY
2. The DLY indicator disappears
Lamp
The MVT-7100 contains a brilliant backlighting system which is used to illuminate both the display and
keypad for night time operations.
On the MVT-7100, the LAMP button must be pressed and held to activate the backlight. When the buttons
is released, the backlight turns off.
The MVT-7200 comes with a switch that can be used to keep the backlight on if so desired.
NOTE : Excessive use of the Lamp feature will dramatically reduce the operational time of the radio when
batteries are being used.
Monitor
The MONI button on the side of the radio is used it immediately open the squelch to help aid in the
reception of signals whose strength might be below the squelch threshold or for monitoring weak signals
which are fading in and out resulting in repetitive squelch operations.
Reset
The MVT-7100 has a reset feature that allows the processor to be reset should the radio act peculiar. Using
this feature effectively restores the radio to the condition it was in when it left the factory.
ALL MEMORY DATA WILL BE ERASED! ALL SEARCH BANDS AND VFO SETTINGS WILL BE RESET TO
THEIR DEFAULT VALUES!
To perform the reset
1. Make sure the radio is powered on
2. Use a small object to press and hold the micro switch located beneath the small opening on the side
panel
3. The radio will reset and then go to VFO mode
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yupiteru MVT-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yupiteru MVT-7100 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yupiteru MVT-7100

Yupiteru MVT-7100 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info