647898

Yupiteru MVT-7100 Manual

13
Zoom out
Zoom in
Previous page
1/16
Next page
NOTE : When the last frequency has been removed, the radio will return to VFO mode.
To Exit From Search Pass Memory
Press C/AC or FUNC + SPR
Priority Mode
The MVT-7100 can be programmed with a priority channel which, when priority is enabled, will be checked
every five seconds for activity. The priority channel is actually an extension of the 1000 memory channels.
Programming The Priority Channel
1. Go to VFO mode
2. Tune the desired frequency and receive mode
3. Enter 1000
4. Press FUNC + MW
5. The channel number ‘P’ is briefly displayed then the radio returns to VFO mode
Displaying Priority Channel Data
The Priority channel is located at the end of ‘normal’ memory and can be simply though of as memory
channel number 1000.
To view the priority channel data
1. Key in 1000
2. Press MR
3. A channel number of ‘P’ should be displayed confirming that the priority frequency is being viewed
NOTE : The memory channels and priority channel have been separated so
that they do not become confused with each other, even though the priority channel is channel 1000.
Erasing Priority Channel Data
Once a priority channel has been programmed to memory, it is easy to erase the channel contents.
1. Display the priority channel
2. Press FUNC + MW
Enabling Priority Mode
Once the desired priority channel has been programmed, it is now ready to be checked for activity. There
are two sub-modes that can be used to check the channels for activity.
To Enable Priority Checking
1. Press FUNC + PRI
2. The PRI indicator appears
Disabling Priority Mode
To disable priority mode
1. Press FUNC + PRI
2. The PRI indicator disappears
Attenuator
The attenuator setting for the priority channel can be changed at any time. The current status can be view
by looking for the ATT indicator.
To change the attenuator setting
1. Display the desired priority channel
2. Press FUNC + ATT
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yupiteru MVT-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yupiteru MVT-7100 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yupiteru MVT-7100

Yupiteru MVT-7100 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info