647898
5
Zoom out
Zoom in
Previous page
1/16
Next page
Search Band Programming
In this mode, the search bands (1-0) used to perform searches are programmed with starting and ending
frequencies as well as step sizes and receive modes.
Searching
In this mode, the searching operation checks for active transmissions on the frequencies in the specified
search range. There are two searching modes which can be performed.
The two modes are :
VFO: starts searching from the current VFO frequency
Band: search a preprogrammed search band
Search Pass
The radio is in Search Pass mode when a blinking P indicator is visible and the contents of the Search Pass
memory are being displayed.
VFO
The radio is in VFO mode when there is a frequency displayed but no memory channel or ‘CH’ LCD
indicator present. Pressing the MR key toggles between VFO and Memory modes.
Terminology
When you see ‘FUNC + key’
Press FUNC
You will hear a beep (if enabled) and FUNC will be displayed
Press ‘key’
Mode Operations
VFO Mode
VFO holds:
Frequency
Step size
Receive mode
Attenuator
Delay
Skip
How to change the frequency
Simply key in the desired frequency
1. Enter the frequency
2. If you make a mistake during entry
A. Press C/AC
B. Use arrow keys to select digit to be corrected
C. Change digit using key press or rotary control
D. Press ENT when completed
3. Press ENT
NOTE: Instead of correcting at step 2 above, simply press C/AC twice and start over with the frequency entry.
Use the rotary control or arrow keys
Use the rotary control or arrow keys to increase or decrease the currently displayed frequency by the
currently set step size. Holding down an arrow key will change the frequency rapidly.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yupiteru MVT-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yupiteru MVT-7100 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yupiteru MVT-7100

Yupiteru MVT-7100 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info