647898
8
Zoom out
Zoom in
Previous page
1/16
Next page
To erase the contents of a memory/priority channel
1. Display the desired channel
2. Press FUNC + MW
Receiving Empty Channel Signals
Due to the design of this receiver, if an empty memory channel is being displayed, the radio circuitry will be
trying to receive the frequency of the last non-empty channel that was accessed. While this causes no
harm, it can be surprising when it occurs.
Attenuator
The attenuator setting for each memory channel can be changed at any time. The current status can be
view by looking for the ATT indicator.
To change the attenuator setting
1. Display the desired memory/priority channel
2. Press FUNC + ATT
Scan Pass
Associated with each memory channel is a setting which allows that channel to be skipped during scan
operations. This feature is called scan pass and is covered in more detail under Scanning Modes.
To set scan pass
1. Display the desired memory channel
2. Press FUNC + PASS
3. Note that CH blinks
NOTE : The priority channel can not be passed.
To clear scan pass
1. Display the desired memory channel
2. Press FUNC + PASS
3. Note that CH does not blink
Program Scan
This feature allows up to ten channels in each bank to be specially tagged so that they may be scanned
separately from the rest of the channels in that bank. This feature is called program scan and is covered in
more detail under Scanning Modes.
To Tag A Memory Channel
1. Display the desired memory channel
2. Press FUNC + PGM
3. The PGM indicator appears
NOTE : The priority channel does not support program scan and
therefore can not be tagged.
To Untag A Memory Channel
1. Display the desired memory channel
2. Press FUNC + PGM
3. The PGM indicator disappears
Scanning Modes
The MVT-7100 offers six different ways to scan the contents of memory. There are two major and three
minor modes of operation. By combining a major mode with a minor mode, six different scanning types are
available.
The two major modes are
Continuous
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yupiteru MVT-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yupiteru MVT-7100 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yupiteru MVT-7100

Yupiteru MVT-7100 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info