478504
28
Zoom out
Zoom in
Previous page
1/132
Next page
Page 26 FT-950 OPERATING MANUAL
DISPLAY INDICATIONS
(
RIGHT SIDE
)
TX
This indicator appears during transmission.
BUSY
This indicator appears whenever the receiver squelch
is open. If this indicator is not showing, and reception
seems to have been lost on the receiver for no apparent
reason, check the position of the
[
SQL
]
knob and ro-
tate it fully counter-clockwise to restore reception.
FAST
This indicator appears when the Main Tuning Dial
knob’s, tuning rate is set to “fast”.
LOCK
This indicator appears when the Main Tuning Dial knob
is locked.
LSB, USB, CW, AM, FM, RTTY, PKT
Displays the current operating mode.
Tuning Offset Indicator
This is a tuning scale that, as configured from the fac-
tory, provides a visual CW tuning indication of the in-
coming signal’s offset from your transceivers CW car-
rier frequency, as programmed by the relative clarifier
offset, or the peak position of the optional µ-TUNE
filter.
CLAR
This indicator appears whenever the Clarifier function
is activated.
MR
This indicator appears when the FT-950 is in the
Memory Recall mode.
MT
This indicator appears when the FT-950 is in the
Memory Tune mode to indicate that the memory con-
tents have been temporarily changed.
Multi-Display Window
This window displays either the Clarifier offset or the
Memory Channel Number.
ADVICE:
During FM operation, the Repeater Shift will be
indicated in this window. A Negative frequency shift
will be indicated by “” while a Positive frequency
shift will be indicated by “+”.
When setting the Menu items, the current setting
will appear in this area.
When setting the CTCSS Tone Squelch Encoding,
the current repeater shift direction will appear in
this area.
When controlling the optional rotator, the antenna
direction will appear in this area during setup.
Frequency Display
This is the frequency display.
ADVICE:
When adjusting the keying speed of the internal
CW keyer, the keying speed will appear in this area
during setup.
When adjusting the “null” position of the Notch
filter, the center frequency of the Notch filter will
appear in this area during setup.
When adjusting the “null” or “peak” position of
the Contour filter, the center frequency of the Con-
tour filter will appear in this area during setup.
When adjusting the microphone gain, the micro-
phone gain level will appear in this area during
setup.
When adjusting the passband of the IF DSP filter,
the shift value of the IF SHIFT will appear in this
area during setup.
When adjusting the bandwidth of the IF DSP filter,
the bandwidth of the IF passband will appear in
this area during setup.
When setting the Menu items, the Menu item num-
ber, Menu group name, and Menu item name will
appear in this area during setup.
When setting the CTCSS frequency for Encoding
or Tone Squelch operation, the current tone infor-
mation will appear in this area during setup.
When controlling the optional rotator, the current
rotation speed will appear in this area during setup.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info