478504
26
Zoom out
Zoom in
Previous page
1/132
Next page
Page 24 FT-950 OPERATING MANUAL
PROC
This indicator appears whenever the DSP Speech Pro-
cessor is activated.
MONI
This indicator appears whenever the transmit monitor
circuit is activated.
KEYER
This indicator appears whenever the internal CW keyer
is activated.
BK-IN
This indicator appears whenever CW break-in opera-
tion is activated.
NB
This indicator appears when the receivers “short-du-
ration” Noise Blanker is activated.
This indicator will blink for three seconds, and there-
after appears continuously, when the receiver’s “longer
pulse” Noise Blanker is activated.
NAR
This indicator appears whenever the receivers narrow
IF DSP filter is engaged.
S/PO
On receive, this indicates the received signal strength,
from S-0 to S-9+60dB on receiving.
On transmit, it indicates the RF Power Output, from 0
to 150 Watts on transmit.
ADVICE:
The S and PO meters can be set to the Peak-hold func-
tion via the Menu items “007 DISP PKH S” and “008
DISP PKH PO”.
Multi Function Meter
The five Transmit Multi-Meter functions are listed be-
low.
DISPLAY INDICATIONS
(
LEFT SIDE
)
Indicates the relative ALC voltage.
Indicates the Standing Wave Ratio
(Forward: Reflected), from 1.0 to 3.0.
Indicates the final amplifier drain current,
0 to 30 ampere.
Indicates the final amplifier drain voltage
(nominal value: 13.8 V).
Indicates the speech compressor level,
from 0 to 30 dB.
ALC
SWR
ID
VDD
COMP
The function displayed is selected by repeatedly press-
ing the
[
METER
]
switch, to step through the available
meter displays. (ALC
SWR
ID
VDD
COMP
ALC
....
)
ADVICE:
The ALC and ID meters can be set to the Peak-hold
function via the Menu items “009 DISP PKH ALC
and “010 DISP PKH ID”.
TUNER
This indicator appears when the internal Automatic An-
tenna Tuner is activated.
HI-SWR
This indicator appears if the directional coupler and
microprocessor detect an abnormally high SWR con-
dition (over 3.0:1) that cannot be resolved by the Au-
tomatic Antenna Tuner.
NOTE:
If this indicator appears, check to be sure that you have
the correct antenna selected for the current operating
band. Also check the condition of the antenna, the co-
axial cable, and/or the connectors on the cable, to lo-
cate and correct the fault.
MIC EQ
This indicator appears whenever the Three-Band Para-
metric Microphone Equalizer is activated via the Menu.
REC
This indicator appears while the optional Voice
Memory Unit is recording your voice message, or the
Contest Keyer is recording your CW keying.
PLAY
This indicator appears while the optional Voice
Memory Unit is playing back the recorded voice mes-
sage, or the recorded Contest CW keying.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info