478504
24
Zoom out
Zoom in
Previous page
1/132
Next page
Page 22 FT-950 OPERATING MANUAL
FRONT PANEL CONTROLS & SWITCHES
[
BAND
]
Keys
These keys allow one-touch selection of the desired
Amateur band (1.8 ~ 50 MHz).
The keys may also be used for direct entry of a desired
operating frequency during VFO operation.
[
MODE
]
Switches
Pressing one of these switches, selects the operating
mode, as shown in the chart below. Repeated presses
of a particular switch will toggle to the alternate mode,
or step through the available selections. For example
pressing
[
SSB
]
button repeatedly toggles between
“LSB” and “USB” mode.
For
[
RTTY/PKT
]
operation, press the button briefly
to toggle between “RTTY” and “PKT”. Press and hold
the button, repeatedly, to step through
“PKT(LSB)” “PKT(USB)”
“PKT(FM)” “PKT(LSB)”
....
[
ATT
]
Switch
This button selects the degree of attenuation, if any, to
be applied to the receiver input.
Available selections are –6 dB, –12 dB, –18 dB, or
OFF. The attenuation level appears in the ATT column
of the Block Diagram Display on the display.
ADVICE:
The Attenuator may be used in conjunction with the
[
IPO
]
button to provide two stages of signal reduction
when an extremely strong signal is being received.
[
IPO
]
(
I
NTERCEPT
P
OINT
O
PTIMIZATION
)
Switch
This button may be used to set the optimum front end
characteristics of the receiver circuit for a very strong
signal environment. Available selections are AMP 1
(low distortion amplifier), AMP 2 (2-stage low-distor-
tion RF amplifier), or ON (bypasses the front end RF
amplifier), and the selected receiver RF amplifier ap-
pears in the IPO column of the Block Diagram Dis-
play on the display.
SWITCH
[
SSB
]
[
CW
]
[
AM/FM
]
[
RTTY/PKT
]
VARIABLE MODE SELECTIONS
LSB USB
CW
(
LSB
)
CW
(
USB
)
AM FM
Momentarily: RTTY
(
LSB
)
PKT
(
LSB
)
Press & Hold: RTTY
(
LSB
)
RTTY
(
USB
)
or
PKT
(
LSB
)
PKT
(
USB
)
PKT
(
FM
)
PKT
(
LSB
)
....
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info