478504
22
Zoom out
Zoom in
Previous page
1/132
Next page
Page 20 FT-950 OPERATING MANUAL
FRONT PANEL CONTROLS & SWITCHES
[(
VFO-A
)
RX
]
Indicator/Switch
Press this button to activate receive on the VFO-A fre-
quency. The LED inside the button will glow green
when the transceiver receives the VFO-A frequency.
When the transceiver receives the VFO-A frequency,
pressing this button momentarily will mute the receiver,
and the indicator will blink. Pressing the button once
more will restore receiver operation, and the indicator
will glow green steadily.
QMB
(
Quick Memory Bank
)
Switches
[
STO
] (
Store
)
Button
Pressing the
[
STO
]
button copies the contents (fre-
quency, mode, bandwidth, and also FM repeater fre-
quency shift/direction and CTCSS functions) of VFO-
A, into consecutive QMB Memories.
[
RCL
] (
Recall
)
Button
Pressing the
[
RCL
]
button, recalls one of up to five
Quick Memory Bank memories for operation.
[
NAR
] (
Narrow
)
Switch
In the SSB/CW/RTTY/PSK modes, this button is used
to set the DSP (digital) IF filters to Narrow bandwidth.
ADVICE:
You may adjust the bandwidth using the
[
SELECT
]
knob when the
[
WIDTH
]
button is engaged.
In the AM mode, this button is used to toggle the
receivers bandwidth between wide (9 kHz) and nar-
row (6 kHz).
In the FM mode on the 28 MHz and 50 MHz bands,
this button is used to toggle the FM deviation/band-
width between wide (±5.0 kHz Dev./25.0 kHz BW)
and narrow (±2.5 kHz Dev./12.5 kHz BW).
[
SPLIT
]
Switch
Press this button to operate split frequency between
VFO-A (used for reception) and VFO-B (used for trans-
mission). If you press and hold in the
[
SPLIT
]
button
for one second, the “Quick Split” feature will be en-
gaged. VFO-B will automatically be set to a frequency
5 kHz higher than the VFO-A frequency, with the same
operating mode. The transceiver will be placed in the
Split mode.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info