478504
30
Zoom out
Zoom in
Previous page
1/132
Next page
Page 28 FT-950 OPERATING MANUAL
TO
1
ANT
DC IN
2
FROM
GND
ROT LINEAR TUNER PTT REC REM KEY
DMU CAT
EXT
SPKR
-TUNE
-TUNE
INPUT
22 A
: DC 13.8 V
REAR PANEL
REC Jack
This RCA jack provides low-level receiver audio out-
put and transmit (monitor) audio output (requires the
[
MONI
]
button is turned on), for recording or external
amplification. Peak signal level is 30 mVp-p at 10
kOhms.
REM
(
REMOTE
)
Jack
By plugging in the optional FH-2 Remote Control Key-
pad to this gold-plated jack, direct access to the FT-
950 CPU is provided for control functions such as con-
test memory keying, plus frequency and function con-
trol.
EXT SPKR Jack
This 3.5-mm, 2-contact, gold-plated jack provides vari-
able audio output for an external loudspeaker. The au-
dio output impedance at this jack is 4 - 8 Ohms, and
the level varies according to the setting of the front
panel
[
AF GAIN
]
knob. Inserting a plug into this jack
disables the internal loudspeaker.
KEY Jack
This 1/4-inch 3-contact jack accepts a CW key or keyer
paddle. A two-contact plug cannot be used in this jack.
Key-up voltage is +3.3 V DC, and key-down current is
0.3 mA. Plug wiring is shown on page 15. This jack
may be configured for keyer, “Bug”, “straight key”, or
computer keying interface operation via Menu item
039 A1A R-TYPE”.
µ-TUNE Jack
This covered 10-pin mini-DIN jack is used for control
of the optional RF µTuning Kit.
DMU Jack
This covered 8-pin mini-DIN jack accepts a cable to
connect an optional DMU-2000 Data Management
Unit.
CAT Jack
This 9-pin serial DB-9 jack allows external computer
control of the FT-950. Connect a serial cable here and
to the RS-232C COM port on your personal computer
(no external interface is required).
PGM-SW Switch
This slide switch is used for updating the transceiver’s
firmware. The update software and instructions are
available for download from the Vertex Standard
website (http://www.yaesu.com/).
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info