724654
8
Zoom out
Zoom in
Previous page
1/16
Next page
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
(toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
e-mail: help@powertoolsupport.com1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
12 13
WARNING:
To prevent serious injury from accidental operation, turn the
power switch of the vacuum o and unplug the appliance from its
electrical outlet before performing any procedure in this section.
Before you connect the vacuum to a mains supply, make sure that
the data on the rating / technical label is identical to the mains data.
The Wet and Dry Vacuum should only be connected to a mains
power supply socket; an RCD (Residual Current Device) is
recommended.
The Wet and Dry Vacuum requires some assembly prior to use. This includes
assembly of the wheels, and dependent upon the use of the product, the
exible hose, tubes, lters, and accessories. The following detail covers the
assembly required for each function of the Wet and Dry Vacuum.
Assembly of the wheels
1. Remove the appliance head (2) from the tank (10) by unlocking the
2 x side locking handles (6) pulling them outwards, then upwards (Fig A).
Then turn the tank (10) upside down.
2. Fit the 4 x castor wheels (13) by inserting the mounting pin on the castor
wheel (13) into the designated mounting hole on the underside of the
base (12). Firmly push the castor wheels (13) into the mounting holes
(Fig B).
NOTE: Take care not to damage the castor wheel.
They do not need to be forced into position.
3. When all 4 castor wheels (13) are tted, turn
the product the right way up, and re-attach
the appliance head (2) ensuring you align the
notches on the ridge of the tank lip with the
side locking handles, and secure the 2 side
locking handles (6) in position (Fig C).
Assembly of the Carry Handle
1. Place the carry handle (1) in the grooves on
the top of the appliance head (2) so that they
are tted and align correctly (Fig D).
2. Using a phillips screwdriver, insert and secure
the screws through each side of the handle until
secure (Fig E).
Assembly for Dry Vacuuming –
HEPA Filter
WARNING: Never use the vacuum without
a lter. Check that the lter is securely tted
at all times.
The Wet and Dry Vacuum is tted with the HEPA
lter (16) used for dry vacuuming upon purchase.
To continue assembly for dry vacuuming, continue
to the ‘Fitting the exible hose’ section on page 15.
Assembly Assembly
Assembly
B.
D.
A.
C.
Notch
E.
Tighten
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone MWW706S-35L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone MWW706S-35L in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info