724654
15
Zoom out
Zoom in
Previous page
1/16
Next page
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
(toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
e-mail: help@powertoolsupport.com1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
26 27
Troubleshooting Specications
Troubleshooting
WARNING! You must pull out the power plug from the mains outlet before
commencing any cleaning, maintenance or inspection work procedures on
the appliance. Reconnect power to the machine when safe to do so.
Mains Voltage: 220-240V ~ 50/60Hz
Vacuum Rated Power: 1200W
Maximum Power Consumption of AC
Socket Outlet: 1200W
Maximum Total Power Consumption: 2400W
Tank Capacity: 35L +/- 2%
IP Rating: IPX4
Weight (NW): 6.2kg
Product Dimensions: 67 x 34 x 34 cm
This product complies with the following standards:
Safety: AS/NZS 60335.2.2 & AS/NZS 60335.1
EMC: EN55014 +A1+A2
Technical Specications
Problem Possible Cause Possible Solution
Suction
decreases
Blocked flexible hose (17) Gently remove obstruction using a long
stick
Blocked extension
suction tube (18)
Gently remove obstruction using a long
stick
Tank (10) has reached 2/3
full or is completed full
with waste and debris
Completely empty tank (10)
Noise of
vacuum
changes
and suction
decreases
HEPA filter (16) dirty and
clogged
Clean the HEPA filter (16) regularly by
carefully patting it and cleaning it with a
fine brush or hand brush (not supplied).
If suction continues to decreases after
cleaning the filter, replace with a new
HEPA filter.
Foam filter (19)
is dirty and
clogged
Clean the foam filter (19) with a little soft
soap under running water. If suction
continues to decrease after cleaning
the filter, replace with a new foam filter.
Tank (10) has reached 2/3
full or is completed full
with waste and debris
Completely empty tank (10)
Wrong filter has been
used
Use the correct filter for the application at
hand. Follow all warnings and instructions
provided in this user manual
Appliance
will not
operate
when the
power tool
is switched
on
Incorrect ON/OFF
switch (3) mode selected
Select the Automatic Mode “II” in the
ON/OFF switch
(3)
Faulty power
cord or
faulty mains outlet
Plug appliance into another mains outlet.
If it doesn’t work, the power cord must be
replaced by a certified electrician using
identical replacement parts
Appliance
does not
turn on
Faulty power cord or
faulty mains outlet
Plug appliance into another mains outlet.
If it doesn’t work, the power cord must be
replaced by a certified electrician using
identical replacement parts
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone MWW706S-35L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone MWW706S-35L in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info