724654
6
Zoom out
Zoom in
Previous page
1/16
Next page
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
e-mail: help@powertoolsupport.com1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
11
Specic Safety Instructions
Never use the vacuum without a lter. Check that the correct lter is
used for the correct application and that the lter is securely tted at all
times.
The foam lter may only be used for wet vacuuming.
The HEPA lter may only be used for dry vacuuming.
Do not vacuum anything that is burning or smoking, such as cigarettes,
matches, hot ashes, or hot coals. Do not vacuum large fragments of glass
and sharp objects.
This appliance must not be used in areas where a risk of explosion is
present.
Certain materials may produce explosive vapours or mixtures when
agitated by the suction air. Never vacuum up the following materials or
use the appliance where the following materials are present:
Flammable, Explosive or combustible gases, liquids and dust particles
(reactive dust particles), including gasoline.
Reactive metal dust particles (such as aluminium, magnesium, zinc) in
combination with highly alkaline or acidic detergents.
Undiluted acids and alkalis.
Organic solvents (such as petrol, paint thinners, acetone, heating oil and
other oils).
Burning matches, ash and cigarette butts In addition, these substances
may cause the appliance materials to corrode.
Do not vacuum up any toner dust, which is used in printers, copiers
and fax machines for example, because it is electrically conductive. In
addition, it is possible that it will not be completely ltered out by the
lter system of the Wet and Dry Vacuum and can be released into the air
via the exhaust fan.
This appliance is NOT suitable for vacuuming ne dust which can
be harmful to health and to the safe operation of the appliance.
The ne dust particles, such as sanding plaster, can accumulate
around the HEPA lter which will cause reduced suction and motor
overheating. This may damage the appliance.
Do not use without installing the correct lter for the job required.
Do not continue to use the vacuum when the tank is full of liquid.
Do not vacuum water from containers, such as sinks, tubs, barrels, etc.
Make sure that the correct lter has been inserted securely in its holder
before using the appliance. The wrong lter or an incorrectly installed
lter can cause damage to the appliance and will immediately void the
warranty.
Check the oating safety valve (19) often for free movement.
This Wet & Dry Vacuum has been designed for DIY use in the shed,
workshop or garage.
This Wet & Dry Vacuum is NOT suitable for every day household
vacuuming as this will cause premature damage to the machine and
will void the warranty. This Wet & Dry Vacuum must NOT be used to
replace your household daily vacuum cleaner.
8 9
MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406 MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone MWW706S-35L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone MWW706S-35L in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info