724654
10
Zoom out
Zoom in
Previous page
1/16
Next page
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
(toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
e-mail: help@powertoolsupport.com1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
16 17
Assembly Operation
Fitting the extension tubes and tools
1. To t an extension tube (18) to the end of the
exible hose (17), apply the larger opening end
of an extension tube (18) over the end of the
exible hose (17) (Fig M).
2. To add an additional (2 or 3) exible tube/s,
apply the larger opening end of the extension
tube/s (18) over the rst extension tube until
secure (Fig N).
3. For vacuuming, either the oor tool (20), or
crevice tool (21) can be added to the end of the
last extension tube (18) by simply pushing it
onto the extensions tube (Fig O/P)
Dry Vacuuming
WARNING: Users must strictly observe all
warnings and information contained in section
‘General Safety Instructions’ and in section
‘Specic Safety Instructions’ before operating this
appliance.
WARNING: DO NOT use the foam lter (19)
for dry vacuuming applications.
IMPORTANT: The Wet and Dry Vacuum should
only be connected to a mains power supply
socket; an RCD (Residual Current Device) is
recommended.
1. Ensure the tank (10) is completely dry and free
from dust and dirt.
2. Only use the HEPA lter (16) for dry vacuuming
applications (Fig R). Ensure you have already
tted the exible hose (17), extension
tubes (18), and if required, the oor tool
(20) or crevice tool (21) for dry vacuuming
applications.
IMPORTANT: Ensure the HEPA lter is securely
tted before starting the Wet and Dry Vacuum.
3. Plug the power cord (9) into the mains power
outlet and turn on.
4. To commence vacuum mode operation, press
the “I” on the ON/OFF switch (3) (Fig S).
5. To turn o vacuum mode, press the “O on the
ON/OFF switch (3) (Fig T).
* Dust bags (61406-DB) can also be used for dry
vacuuming and can be purchased separately as
an accessory. Refer to page 25 for details.
On/O switch (Fig Q):
Switch Position 0: OFF (All operations shut o)
Switch Position I: For normal vacuuming
operation (wet or dry)
Switch Position II: Automatic Mode for Power
Tool operation. The vacuum motor will only turn
ON when a power tool, which is plugged into the
AC outlet socket (4) is switched ON. The vacuum
motor will turn OFF when the power tool is switched OFF.
M.
N.
R.
O.
S.
P.
T.
Q.
Operation
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone MWW706S-35L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone MWW706S-35L in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info