724654
9
Zoom out
Zoom in
Previous page
1/16
Next page
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
(toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
e-mail: help@powertoolsupport.com1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
14 15
Assembly Assembly
Assembly for Wet Vacuuming – Foam Filter
WARNING: Never use the vacuum without a lter. Check that the lter
is securely tted at all times.
1. Remove the appliance head (2) from the tank (10) by unlocking the 2 x
side locking handles (6) pulling them outwards, then upwards (Fig A).
Place the appliance head (2) upside down onto a at surface, or on its side
(if the carry handle is already assembled).
2. Remove the HEPA lter (16) (installed upon purchase) by pulling it away
from the appliance head (2) (Fig F).
3. Slip the foam lter (19) over the lter basket (14) (Fig.G). Ensure the foam
lter (19) covers the full lter basket (14) (Fig H).
NOTE: The foam lter (19) is only suitable for WET vacuuming.
IMPORTANT: Regularly clean the foam lter (19) and allow it to dry before
resuming vacuuming.
IMPORTANT: DO NOT use the HEPA lter for wet vacuuming (the HEPA
lter is pre-installed upon purchase).
IMPORTANT: The Wet and Dry Vacuum should only be connected
to a mains power supply socket; an RCD (Residual Current Device) is
recommended.
4. Re-assemble the appliance head (2) back onto the tank (10), and secure
the 2 x side locking handles (6).
NOTE: Always unplug the appliance after use and before cleaning or
changing the lters or accessories.
Fitting the Flexible Hose
Connect the exible hose (17) to the exible hose
outlet depending on the application required:
1. Vacuuming
Connect the exible hose (17) to the exible
hose outlet – suction (7) by inserting into the
outlet and aligning the arrow and locking pin
on the end of the exible hose (17), with the
arrow and ridge on the top of the exible hose
outlet – suction (7). This should ensure the
locking pin on the exible hose (17) aligns
with the ridge in the exible hose outlet –
suction (7). Rotate the exible hose (17) to the
left to secure the hose into position (Fig I/J)
2. Blowing
Connect the exible hose (17) to the exible
hose outlet – blowing (8) by inserting into the
outlet and aligning the arrow and locking pin
on the end of the exible hose (17), with the
ridge on the top of the exible hose outlet –
blowing (8). This should ensure the locking pin
on the exible hose (17) aligns with the ridge
in the exible hose outlet – blowing (8). Rotate
the exible hose (17) to the left to secure the
hose into position (Fig K/L)
H.
I.
J.
K.
L.
G.F.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone MWW706S-35L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone MWW706S-35L in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info