667349

Viking GE 150 Manual

44
Zoom out
Zoom in
Previous page
1/548
Next page
0478 201 9906 D - EN
42
10.4 Switching off the garden
shredder
● Press the red button (1) on the switch
(illus. shows GE 150, GE 250,
GE 250 S).
The garden shredder motor is switched off
and braked automatically.
10.5 Checking the rotational direction
of the blade discs
● Switch on garden shredder. (Ö 10.3)
● Switch off the garden shredder.
(Ö 10.4)
● Press the splash guard inwards and
look at the blade disc from above
through the feed opening:
The correct rotational direction of the
blade disc is anti-clockwise.
10.6 Changing the rotational
direction of the blade discs
The rotational direction of the blade discs
can be changed by reversing the polarity
of the phase rotation device on the mains
plug.
● Using a screwdriver (U), turn the phase
rotation device (1) 180° clockwise or
anti-clockwise.
10.7 Shredding
● Push the garden shredder onto firm and
level ground and set down safely.
● Put on thick gloves, safety glasses and
hearing protection.
● Open the discharge flap. (Ö 7.3)
● Connect the power cable to the garden
shredder. (Ö 10.2)
● GE 260, GE 260 S: Check the
rotational direction of the blade disc and
change if necessary. (Ö 10.5)
● Start the garden shredder. (Ö 10.3)
● Wait until the garden shredder has
reached its maximum speed (idling
speed).
● Feed the garden shredder with
shredding material in the correct way.
(Ö 8.8)
● Switch off the garden shredder.
(Ö 10.4)
11.1 Cleaning the machine
Maintenance interval:
After each use
Clean the machine thoroughly each time it
has been used. Care of the machine will
protect it against damage and extend its
service life.
Electric motors are splashproof.
Protect shredding tools, incl. the shredding
chamber using a commercially available
anti-corrosion agent (e.g. rapeseed oil).
It is only permitted to clean the machine in
the position shown.
● Remove the feed chute. (Ö 11.3)
Remove dirt from the cooling air guide
(inlet slots) on the motor housing to ensure
that the motor is adequately cooled.
Risk of injury!
Do not step into the ejection area
when switching off!
Stand to the side of the machine to
do so.
Beware of the work tools running
on for several seconds before
coming to a standstill after
switching off the motor.
Only switch off the motor when
there is no longer any shredding
material in the machine. Otherwise,
the blade disc may become blocked
when operation is resumed.
On the GE 260 and GE 260 S
models, the rotational direction of
the blade disc must be checked
before commencing work (feeding).
Risk of injury:
Always wear safety glasses when
performing the check.
11
In the case of incorrect rotational
direction (clockwise) of the blade
disc, the rotational direction must
be changed on the GE 260 and
GE 260 S models.
12
11. Maintenance
Risk of injury:
Carefully read the section "For your
safety" (Ö 4.), particularly the
subsection "Maintenance and
repairs" (Ö 4.7), and follow all
safety instructions exactly before
performing any maintenance or
cleaning operations on the
machine.
Disconnect the mains plug before
performing any maintenance
operations.
13
… 44 …


Need help? Post your question in this forum.

Forumrules
1

Forum

viking-ge-150

Reset search

  • Where is the rest locking device on a Viking GE150 shredder please?
    Submitted on 2-4-2022 at 11:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking GE 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking GE 150 in the language / languages: All languages as an attachment in your email.

The manual is 18,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info