611085
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
9. CONVECTION BOX
INSTALLATION
9.1 If installing to masonry fireplace
9.1.1 Place the convection box centrally in the fireplace
opening in the position in which it is to be
permanently installed.
Insert the convection box into
the fireplace opening feeding the supply pipe
through aperture at back of the convection box.
9.1.2 Mark the fireplace surround through the four fixing
holes in the side flanges of the convection box (see
figure 13).
9.1.3 Remove the convection box. Drill four holes in the
fireplace surround at the marked positions using a
no.12 masonry drill.
9.1.4 Insert a wall plug into each hole.
9.2 Secure the collar on the vent connector unit to the
5" diameter chimney liner (Fig. 14).
9.3 Slide the convection box into the fireplace making
sure that the vent connection unit is above the
convection box. Leave the convection box front a
few inches clear of the fireplace front to allow you to
fix the vent connector to the top of the convection
box.
9.4 Pull the vent connector towards the front of the
fireplace and locate the rear slot in the plate on the
lip at top rear of the convection box. Fix the front of
the vent connector plate to the convection box top
using the screw previously removed (Fig.14). Make
sure that the connector plate does not interfere with
the seal at back of the convection box top flange.
9.5 Push the convection box fully home against the
front face of the fireplace. Make sure that no sags or
dips occur in the liner.
9.6 If installing to zero clearance kit #775ZCK; Fit a
thread cutting screw through the four holes in the
convection box side flanges and tighten to seal the
box to the kit (see figure 13).
9.7 If installing to masonry fireplace; Fit a woodscrew
through each hole in the convection box flanges and
tighten to seal the box to the fireplace surround (see
figure 13).
Fig. 13 Convection box fixing
Fig. 14 Vent connector & liner attachment
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Valor 722AN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Valor 722AN in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info