611085
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
“Visage” front; Carefully lift the front surround. Do
not lift it by the control knob. Place it against the
fireplace front surface so that the two retaining
plates at the back of the surround are directly above
the two upper retaining brackets at the top of the
convection box. Lower the surround unit making
sure that the rear retaining plates locate fully over
the retaining brackets on the convection box (See
figure 18).
12.3 Swing the bottom control linking bar towards the
center of the fire to clear the front casting/surround.
Slide the front casting/surround sideways, if
necessary, to align the bottom fixing holes with
those in the convection box. Fix the bottom of the
casting/surround to the convection box with two
screws (See figure 19 or 20).
12.4 Align the hole near the bottom of the control
linking bar with that in the control pivot bracket.
Join them with the knurled shouldered screw (See
figure 21). Make sure that the gas control valve is
closed. Slide the control knob fully from top to
bottom and back to make sure that the slide and
pivot mechanisms move smoothly. Note that some
resistance should be felt when the slide knob
reaches the “burner fully on” position.
Fig. 21 Control bar & pivot bracket (Shown with “Adorn”
f
Fig. 18 “Visage” front casting top location
Fig. 19 “Adorn” Front casting bottom fixing
Fig. 20 “Visage” Front surround bottom fixing
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Valor 722AN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Valor 722AN in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info