573457

Thane FlavorFull Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
ASSEMBLY
7
Proper Installation of FlavorFull™ Infusion Chamber
1. At the bottom of the FlavorFull™ container, there is a ring-like shape around the blades.
2. The silicone ring at the bottom of the Infusion Chamber should fit around it.
3. The ‘arms’ of the Infusion Chamber should slide onto two of the slots inside the container to ensure that the
Infusion Chamber does not move during use.
4. After placing foods/liquids inside the container, the Infusion Chamber is locked into place once the lid for the container is
properly locked.
The FlavorFull™ System has two programmed soup settings to create chunky or smooth soups. It also has a reheat function
enabling precooked soup to be reheated ready to serve.
The built-in blades can be used to allow the FlavorFull™ System to be used solely as a blender to make smoothies, purees,
dips and dressings.
This versatile appliance is fitted with several safety features including an interlocking lid cut-out, a MINIMUM liquid sensor, a
MAXIMUM hot liquid overflow sensor for safe use at all times and a safety micro-switch cut-off (aka the internal sensor) on
the motor base.
All of the FlavorFull™ System functions rely on uninterrupted operation. Any interruption will result in the cancellation of the
program. Restarting will result in the cooking stages being repeated which may affect the final recipe.
INSTRUCTIONS FOR USE
3. Press the “ON/OFF” button, and then select the “SOUP SMOOTH” function to start the program.
4. The contents of the container will alternately be warmed and mixed at regular intervals for around 20 minutes.
5. If needed, the cooking process can be stopped at any time by pressing the “ON/OFF” button.
6. If the finished product needs more cooking time, either press the “SOUP SMOOTH” function again and stop
it after a desired amount of time, or use the “REHEAT” function which will stop cooking on its own after 10 minutes. If extra
cooking time is needed, make sure the overflow sensor is clean before selecting a function again.
7. If the finished product is not smooth enough and there are still some chunks left over, use the “PULSE” function as
needed to get the desired results.
Do NOT add finishing ingredients, such as milk, cream, flour or starch (for thickening) until the cooking has
been completed. Once the unit stops, add the above mentioned ingredients and press “PULSE” for a few seconds to mix
everything well. Make sure that all ingredients are always completely covered with liquid.
“SOUP CHUNKY” Functions (5)
Use this setting to prepare chunky soups or sauces which contain pieces/chunks of vegetables (and precooked meat or fish).
The contents are alternately warmed and mixed for the duration of the cooking process. The maximum temperature reached
is around 100ºC/212ºF. The unit will stop automatically once the cooking function is completed.
1. Place the Infusion Chamber into the container (as shown in the “Assembly” section above).
2. Chop all ingredients into approximately 2-3cm/1-1.5inch cubes and place into the container. Ingredients that need
to retain their texture and size should be placed outside of the Infusion Chamber. If any ingredients need to be
fully blended to add to the flavor of the meal, place them inside the Infusion Chamber.
NOTE: When adding ingredients outside of the Infusion Chamber, place the removable measuring cup over the opening
of the Infusion Chamber to prevent pieces from falling in. Remove the measuring cup when you have finished adding the
ingredients.
It is not recommended to use uncooked meats or fish in the FlavorFull™ System. Any meat or fish must be
precooked. Do not add any frozen meat or fish. All ingredients must be at room temperature before processing.
3. Add water or broth to at least the SOUP MINIMUM mark on the container. The total capacity (solid and/or liquid
ingredients) must not exceed the SOUP MAXIMUM mark on the container.
4. Press the “ON/OFF” button, and then select the “SOUP CHUNKY” function to start the program.
5. The contents of the container will alternately be warmed and mixed at regular intervals for around 20-25 minutes.
6. If needed, the cooking process can be stopped at any time by pressing the “ON/OFF” button.
7. If the finished product needs more cooking time, either press the “SOUP SMOOTH” function again and stop
it after a desired amount of time, or use the “REHEAT” function which will stop cooking on its own after 10 minutes.
If extra cooking time is needed, make sure the overflow sensor is clean before selecting a function again.
Do NOT add finishing ingredients, such as milk, cream, flour or starch (for thickening) until the cooking has
been completed. Once the unit stops, add the above mentioned ingredients and press “PULSE” for a few seconds to mix
everything well. Make sure that all ingredients are always completely covered with liquid.
14
!
CAUTION
!
CAUTION
!
CAUTION
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thane FlavorFull at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thane FlavorFull in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info