480560
17
Zoom out
Zoom in
Previous page
1/27
Next page
PART 2 • English
14
6.3.3 Time Setting
This menu allows you to specify the method which the receiver will use to synchronise the date and
time and you can set the duration for displaying the information banner.
Time Offset: Use t/u to choose Auto to synchronise time and time zone
automatically, or Manual to specify the time zone manually.
Region: Use t/u to choose your specific country.
Time Zone: This setting is only available when the Time Offset is set to
Manual. You can use t/u to adjust the time zone, if the
automatic settings in your region are not supported by the
broadcast.
Summer Time: Use t/u to select On or Off according to your local season.
Banner Time OUT: Use t/u to choose between the available settings: 3s, 4s, 5s, 6s,
7s, 8s, 9s and 10s.
6.3.4 Auto Standby
Auto standby is a new feature that helps you reduce power consumption. When Activation is set to
On, the receiver will switch to standby if it hasn’t received any commands for three hours. Set Auto
Standby to Off to deactivate this function. When the setting is On you can adjust the Duration Before
Standby: Available settings are: 1 Hour - 12 Hours with steps of one hour.
6.3.5 Parental Control
After selecting this menu item and pressing OK you will be asked to enter the PIN code DEFAULT
PIN: 0000. This menu allows you to use the EPG based parental rating system if supported by the
local broadcast.
Age: Use t/u to change the settings. Following rates are available: OFF
(to disable the function), 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16,
17 and 18. Whenever switching through channels which submit EPG
based parental rate and the rate of the current broadcast is below
the adjusted rate, you will have to enter your PIN code.
Example: Your youngest child is 7 years old and you have set a rate of 07. Now when you switch
to a channel which is not foreseen for an age below 10 years you will have to enter the PIN code
DEFAULT PIN: 0000.
6.3.6 Reset Factory Default
This option allows you to reset the receiver to the factory settings, which clears all stored channels
and settings.
WARNING: By resetting your receiver to the factory default, all your settings and
stored channels will be permanently deleted. Please use this option with
care!
After selecting this menu and pressing OK you will be asked to enter the PIN code DEFAULT PIN:
0000. After having entered the PIN code you will be guided to the Installation Guide again!
If necessary, you can change the PIN code. To change the PIN code, please enter the Tools menu, see
chapter 6.4.3 of this manual.
6.4 Tools
Press MENU and use t/u to select Tools, then press OK. Following submenus will be displayed:
Timers, Information, Change Password, USB Upgrade, OAD Upgrade and Remove USB device.
Use p/q to select a submenu and press OK or u to access.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8525 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info