Manual Strong SRT 8525 (page 18 of 27) (English)

480560

Zoom out

Zoom in

1/27

PART 2 • English

English

6.4.1 Timer

The timer function allows you to turn the receiver on and oﬀ according to the deﬁned settings.

Timers can be set from the EPG in the most convenient way but you can also set timers manually via

this menu.

In the menu Schedule, a summary of the conﬁgured timers will be displayed: number, channel

name, date, start and end time, repeat and timer status.

NOTE: The list will be empty if there are no conﬁgured timers.

You can add, change or delete a timer.

Add: To add a timer, press the RED button. Use t/u p/q and 09

in the menu to conﬁgure the settings for the event. After the

settings have been made, set the necessary parameters and press

OK to apply the timer into the list.

Channel Type: Use t/u to choose between TV and radio programmes (the radio

option is not available if there are no radio channels broadcasted/

in the channel list).

Channel No.: Use t/u to select the channel number to which you want to switch.

Channel Name: Shows the name of the chosen channel.

Start Date: Use 09 to enter the date on which the timer should switch the

receiver on. Please consider the date format “dd/mm/yyyy.”

Start Time: Use 09 to enter the start time.

End Time: Use 09 to enter the end time.

Repeat: Use t/u to select in which cycle the timer should be repeated.

Once - the timer will switch ON once, after this the timer will be

removed from timer list. Daily - the timer will switch ON every day

at the set time. Weekly - the timer will switch ON once a week at

the set time.

In viewing mode, the receiver will notify you 10 seconds before a timer starts. You can conﬁrm the

timer by pressing OK or cancel with EXIT. If there is no input given, the timer will be executed. After

the timer event has been ﬁnished, the receiver switches to the last watched channel. If the receiver

was in standby, it automatically turns to standby again after the timer passed.

If you already have timers in the list you can use these functions as well:

Edit: If you wish to change some settings for a present timer, use p/q

to select the timer and press GREEN to open it. Afterwards you

can deﬁne the settings like described in above.

Delete: For deleting a timer you don’t need, use the p/q buttons to

select the timer and press BLUE to delete it. A message will be

shown where you can press OK to conﬁrm deletion or EXIT if you

wish to keep the timer.

After your settings have been made, you can leave the menu with EXIT.

6.4.2 Information

In the Information menu you can get information about the hardware and software version installed

in your receiver. Furthermore, you will ﬁnd information about our website: www.strong.tv. Please

open this menu when you call our hotline or contact the support. The person who answers your

call/email might ask for the information given on this screen.

6.4.3 Change Password

In order to access certain functions of the receiver you need to enter a PIN code. This is done to prevent

changes of the receiver settings through persons who do not know the PIN code (e.g. children).

To change the PIN code to a personal one it is required to enter your old (current) PIN DEFAULT PIN:

0000 by using 09 to enter it, and then to enter the new PIN code and conﬁrm it again in below.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8525 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Strong SRT 8525 Manual

Product: