480560
19
Zoom out
Zoom in
Previous page
1/27
Next page
PART 2 • English
16
6.4.4 Updating the software by USB
This feature allows you to upgrade receiver software via the USB port. If new software is available for
your receiver, it can be downloaded from our website www.strong.tv.
Place the software file (unzipped) into the root directory of your USB storage device (HDD, memory
stick etc.) and insert this device into the USB port of the receiver. Please consider that only USB devices
formatted in FAT or FAT32le system will be detected and can be used for the update process.
Now select Upgrade by USB via the p/q buttons and press OK to proceed. If the USB device is
detected successfully, you will be asked to enter your PIN code DEFAULT PIN: 0000. The receiver
will start the update process now and the progress information will be shown. Please wait until the
update is finished! After the update has been completed, the receiver will reboot automatically.
WARNING: After the update the receiver restarts automatically! During this process
NEVER disconnect the receiver from the main, the USB device or switch
the power OFF! This can damage your receiver and warranty will void!
6.4.5 Software update via terrestrial signals
Your receiver can update software via digital terrestrial broadcast as well. You can find out via your
local support or dealer whether there is a new software version broadcasted in your area.
When you know that there is an update available, enter the menu OAD Upgrade in the Tools menu
and press OK to continue. The further steps will be shown on screen. Please read the instructions
carefully to update your receiver successfully!
During the update, a progress banner will be displayed for your reference.
WARNING: During the update process NEVER disconnect the receiver from the main,
switch the power OFF or disconnect the antenna cable! This can damage
your receiver and warranty will void! After the update has been finished
the receiver restarts automatically!
6.4.6 Remove the USB device
This menu item only appears if a USB device is connected. Select the menu item and press OK to
remove the USB device from your receiver safely. Now you can disconnect the USB device after the
message USB device is removed disappears.
6.5 Multimedia
Press MENU and use t/u to select Multimedia, then press OK. Following submenus will be
displayed: Picture, Music, Movie, Photo Config and Movie Config.
Use p/q to select a submenu and press OK or u to access.
Before you use the various multimedia functions of your receiver, please ensure that your USB
device is connected properly and that it is formatted in the required file system. This will enable you
to view pictures and play music and video files.
6.5.1 Picture
Your receiver supports photo files in the following formats: JPEG, BMP and PNG. To navigate in the
list of files and folders, use the p/q buttons. To open a folder, press OK, when a picture is selected
it is shown in full screen mode. To get back to the list of files, press EXIT. If you currently are in a
subfolder, use the RED button to access the parent folder. The receiver shows the selected files on
the right side next to the list.
When you press the GREEN button, the receiver will show the files in a small preview.
If you want to start the slide show, press u and if you want to quit it again, press 3.
Settings for the slide show can be made in the menu Photo config, see chapter 6.5.4.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8525 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info