480572
9
Zoom out
Zoom in
Previous page
1/20
Next page
6
PART 2 • English
4.2 Country Selection
Select the desired country by using tu and press OK to continue.
4.3 Antenna Installation
In the Antenna Installation Menu the necessary settings for the dish installation will be displayed. Depending on the
selected country there might have been already done a setup for your satellite dish (Austria and Germany: Astra 19.2E
on DiSEqC input 1/ Czech and Slovakia: Astra 23.5E on DiSEqC input 1). These settings will allow you to receive signal
automatically. If you are using another dish setup please ask your installer for further setup and refer to chapter 5.3.1
Antenna Installation. After you confirmed correct parameters with OK, you will be guided to the next step.
Tip If you see that the signal bar levels are orange you might need to adjust your dish position in small steps
until the signal strength and quality bars turn green. Try to reach the maximum possible strength and
quality level. Once you are sure that the signal cannot be improved,x the dish on this position.
4.4 Channel set-up
Here you have the opportunity to select desired installation method Preset, Preset Plus or Auto Search. If you select
Preset and Preset Plus, the receiver will load the country specific channel list. If you select Preset Plus or Auto Search,
you will be guided to the next screen for channel scan.
4.5 Auto Search
Select your preferred channel search method with pq. Via tu you can change the kind of scan process. If you
adjusted these settings according your wishes press OK to start channel search. The search process will take some time
(depending on the chosen search method). After the channel search has finished, the FIRST TIME INSTALLATION is
completed and the first programmed channel will be displayed on screen.
5.0 MAIN MENU
All important settings and features of your receiver can be operated in Main Menu. The Main Menu consists of
following sub-menus: “Program Table”, “Favourites”, “Installation”, “Configuration”, “Timer”, “Games”, “Media Browser”
and “CA System.” To enter Main Menu press the OPTS button in viewing mode.
5.1 Program Table
In Main Menu screen, use the pq buttons to select Program Table and press OK to enter this menu. In this menu,
you can choose between following actions: Select, Move, Delete, Edit and Lock desired channels. With BACK you can
always cancel actions and exit the actual menu or submenu.
Select
In this mode you can select different channels you want to watch and decide maybe afterwards what you want to do with
this desired channel. Use the
pq buttons in the program table to go through the channel list, furthermore you can use
the RED (PG up) and GREEN (PG down) buttons for scrolling page wise. With OK you can switch to selected channel.
The frequency and satellite name of the selected program will be displayed below the picture of this channel.
Move
Here you can change the order of desired channels. Select Move with the
tu buttons, then the channel with the pq
buttons and press OK to mark it for moving (coloured dark blue and marked with move sign). Now you will be able to
choose a new position for the desired channel with the
pq buttons, confirm the new position with OK. If you don’t
want to move the selected channel, you can cancel by pressing BACK.
Delete
Select Delete with the
tu buttons, then with the pq buttons the channel you want to delete and press OK to mark it
for deletion. Pressing OK again will unmark the selection. After you have marked all channels you want to delete, press
BACK. You’ll be asked if you want to delete the selected programs. Select YES to confirm and NO to cancel deletion.
Edit
Select Edit with the
tu buttons, then with the pq buttons the channel you want to edit and press OK to enter
renaming line. Use the NUMERIC buttons to enter the desired name and press OK to confirm. For cancellation press
BACK. Maximum value for inserted characters is 15.
Lock
Select Lock with the
tu buttons, then with the pq buttons the channel you want to lock and press OK to mark it
for locking. First you’ll need to insert your PIN Code (Default: 0000). Then the desired program will show the padlock
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7500 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info