480572
7
Zoom out
Zoom in
Previous page
1/20
Next page
4
PART 2 • English
Accessories:
1 x Remote control
2 x AAA Batteries
1 x HDMI cable
2.0 YOUR RECEIVER
2.1 Front Panel
Fig. 1
1. STANDBY/ON: Set receiver to Standby or ON mode.
2. MENU: Access to the Main menu
3. BACK: Viewing mode: remove appearing messages.
In Menu mode: go to previous screen or menu.
4. OK: Viewing mode: enter the channel list; another pressing on selected channel will
switch back to viewing mode.
In Menu mode: enter selected submenus and confirm settings.
5. INFO: Shows current channel information
6.
tupq: Viewing mode: used to switch channel up/down or de-/increase the volume.
In Menu mode: buttons are used for navigation
2.2 Rear Panel
Fig. 1
1. SAT IN: To connect satellite antenna cable.
2. HDMI: To connect to HDMI connector of your TV set.
3. ETHERNET: For service use only.
4. TV SCART: For connection of Scart cable to your TV set.
5. AUDIO OUT L/R: Audio output.
6. OPTICAL AUDIO OUT: Digital optical audio output to connect to your amplifier or sound system.
7. RS-232: For service use only.
8. POWER CABLE: To connect to power source in range of 220 - 240 V AC, 50 Hz.
2.3 Remote Control Unit
Fig. 3
1. MUTE: To mute the Audio output
2. STANDBY/ON: Switch to Standby or ON
3. DIGIAKTIF: Used to show technical channel info (in viewing mode)
4. MODE: Direct access to games menu (in viewing mode)
5. MEDIA: Direct access to the media browser (in viewing mode)
6. TV/RADIO: Switch between TV, Radio and All channel list mode (in viewing mode)
7. FAV: Access the FAV list (preconditioned FAV list is defined)
8. LANG: Select available audio languages (in viewing mode)
9. SUBT: Select available subtitle languages (in viewing mode)
10. OPTS: Access to the Main menu
11. GUIDE: Access the Electronic Program Guide
12. INFO: Shows current channel information
13.
pqtu: Viewing mode: used to switch channel up/down or de- /increase the volume.
In Menu mode: buttons are used for navigation
14. OK: Viewing mode: enter the channel list; another pressing on selected channel will switch to
viewing mode again.
In Menu mode: enter selected submenus and confirm settings.
15. P<P: To switch between 2 previously watched channels
16. BACK: Viewing mode: Remove appearing messages.
In Menu mode: to go to previous screen or menu.
17. PR -/+: Used to switch through the channels (in viewing mode)
18. VOL -/+: Used to decrease or increase the volume
19. COLORED BUTTONS: Used for teletext functions.
In Menu mode: RED/GREEN used to scroll lists and YELLOW/BLUE for special described functions.
20. NUMERIC BUTTONS: used to insert numbers.
In Menu mode: used to insert numbers or letters
21. AV: No function
22. TXT: To show the teletext
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7500 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info