480572
8
Zoom out
Zoom in
Previous page
1/20
Next page
5
PART 2 • English
English
23. FRW: No function
24. FF: No function
25. TIMERS: To access directly to timer menu
26. LIB: No function
27. PLAY: Used for media player function
28. STOP: Used for media player function
29. PAUSE: Used for media player function; in viewing mode access to zoom menu
30. RECORD: No function
2.4 DEFAULT PIN-CODE: 0000
3.0 CONNECTIONS
3.1 Connecting to Satellite Dish
Connecting a fixed satellite dish to your receiver
Make your choice of which satellite you want to receive your signals from, and have your dealer aim your dish at the requested
satellite. Connect a coax cable to your LNB and the other end directly to the SAT IN connector of your receiver. (Fig. 4)
Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch
If you want to watch programs from more than one satellite (For example from Astra and from HotBird) it is advisable
to use fixed dishes and a DiSEqC 1.0 switch.
Have your Dealer aim the dishes at the requested satellites and connect the LNB with coax cables to the IN connectors
of the DiSEqC 1.0 switch. Connect the OUT connector of the DiSEqC 1.0 switch to the SAT IN connector at the back of
your receiver. (Fig. 5)
Connecting a dish on a motorized positioner to your receiver
Another possibility for watching programs from multiple satellites is by mounting a dish to a motorized DiSEqC
1.2 positioner.
Have your dealer mount the dish to the positioner, set the correct angle of the elevation and let him set the center point
for your positioner. Connect the LNB with a coax cable to the LNB IN connector of the positioner, and connect the OUT
connector of the positioner to the SAT IN connector at the back of your receiver. (Fig. 6)
3.2 Connecting to TV
Connecting by HDMI cable
To fully enjoy your HDTV channels it is advisable to connect your receiver via HDMI to your TV set. Connect one end of
HDMI cable to the HDMI output of your receiver and the other end of cable to HDMI IN connector on your TV. (Fig. 7)
Connecting by SCART cable
Connect the TV SCART connector at the back of the receiver to the SCART IN connector of your TV set. (Fig. 7)
3.3 Connecting to Digital Audio Amplifier
Connect S/PDIF or Audio cinch connectors at the back of your receiver to the appropriate input of your Digital Audio
Amplifier. For audio cinch connection use a cable with a TRS connector (audio jack) at the other end to connect to your
Digital Audio Amplifier. (Fig. 7)
3.4 Connecting to computer by serial cable
This RS-232 connector on the back of your receiver is only used for service purpose. However, this receiver can
download new system software by OTA update from satellite.
4.0 STARTING UP FOR THE FIRST TIME
Ensure that your satellite receiver is correctly connected to your TV and dish and your satellite signal is of good quality.
Ask your local STRONG dealer to check your installation or satellite signal if you are not sure how to do this. Make sure
that the power plug of receiver is plugged into the wall outlet.
The language selection menu will be shown on your TV screen. It is recommended that you dorst time installation following
Installation Wizard step by step. It will help you to easily achieve system configuration and channel installation.
4.1 Language Selection
Select the appropriate language with the pq buttons and press OK to confirm selection. Then country selection
screen will be displayed.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7500 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info