Manual Stiga Pro 740 IOX - P 901 PH (page 259 of 858) (All languages)

608703

259

Zoom out

Zoom in

1/858

ENGLISH

(Translation of the Original Instructions)

Locking:

1. Press the pedal (13:A) right down.

2. Pull the lever (13:B) up.

3. Release the pedal (13:A).

4. Release the lever (13:B).

Unlocking:

Press and release the pedal (13:A).

6.5 TRACTION PEDAL (13:C)

The pedal determines the gearing ratio between

the engine and the drive wheels (= the speed).

When the pedal is released, the service brake is

activated.

- Press the pedal forward – the

machine moves forward.

- No load on the pedal – the ma-

chine is stationary.

- Press the pedal backward – the

machine reverses.

Reduce the pressure on the pedal – the machi-

ne brakes.

        -

pected when the pedal is released, use

the left pedal (13:A) as an emergency

brake.

6.6 STEERING WHEEL (13:E)

The height of the steering wheel is fully adjustable.

Unscrew the adjustment knob (12:E) on the stee-

ring column and raise or lower the steering wheel

accordingly. Tighten.

 

the machine is running.

Never turn the steering wheel when the

machine is stationary with a lowered

accessory. There is a risk of abnormal

loads on the servo and steering mecha-

nisms.

6.7 THROTTLE CONTROL (ACCELERATOR)

(14:A)

Control for regulating engine running speed.

1. Full throttle – should always be used

when the machine is in use.

2. Idling.

6.8 CHOKE CONTROL (14:B)

A choke control to be used when starting the

engine in cold conditions.

1. Control fully pulled out - buttery clo-

sed. For starting the machine in cold condi-

tions.

2. Control pushed in - buttery open. For

starting the engine in warm conditions and

during operation.

Do not use the choke when the engine

is warm.

6.9 KEY SWITCH (14:C)

Key for enabling/inhibiting machine

start-up.

Insert the key (14:C) and turn it to the “ON”

(START) position to enable machine start-

up. All the indicators on the display and the

acoustic signalling device are momentarily

activated. After which only the “hour meter”

will remain active on the display together

with the oil level warning light (which au-

tomatically turns itself o once the engine

starts) and the parking brake indicator (if

the parking brake is on).

Turn the key to the “OFF” position to inhibit

machine start-up.

The key can only be removed when it is



If the operator moves away from the

-

sition, after 30 seconds a continuous

acoustic warning sound is emitted. The

acoustic warning signal persists until

the operator returns to the machine or



6.10 CONSOLE DISPLAY AND MODE KEY

(14:D; 15)

MODE key (14:E). With the MODE key it

is possible to select the indicator lights

corresponding to the functions: hour

meter, ambient temperature, engine

revs, battery. It is possible to force he-

     

sensor.

• Briey press and release the key to ac-

cess the display indicators correspon-

ding to the various functions in succes-

sion. On the alphanumerical digits on

the display the data associated with the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Pro 740 IOX - P 901 PH in the language / languages: All languages as an attachment in your email.

The manual is 160,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga Pro 740 IOX - P 901 PH Manual

Product: