608703
260
Zoom out
Zoom in
Previous page
1/858
Next page
14
EN
ENGLISH
(Translation of the Original Instructions)
selected icon is displayed, the last gure
is reserved for the unit of measurement.
Press for more than 1 second to turn on
or o the headlamp.
Automatic headlamp control is automa-
tically restored each time the machine
is turned on.
Digits (15:A). Part of the display which
provides alphanumerical data corre-
sponding to the various functions.
Hours meter (15:B). The alphanumeri-
cal digits indicate the number of hours
the machine has been driven, divided
into hours and tenths of hours. It is acti-
ve only when the engine is running. The
unit of measurement is followed by the
letter H.
Ambient temperature (15:C). The alpha-
numerical digits indicate the ambient tem-
perature. The unit of measurement is follo-
wed by the letter C.
Revs counter (15:D). The digits indicate
the number of motor revs. When ashing it
indicates the engine speed, with the PTO
active, is not optimal (over 2500 rpm). Take
the accelerator command to full throttle.
Service (15:E). Provides maintenance
indications. The gures on the digits start
ashing when the machine has reached the
service time threshold.
Flashing will continue for two minutes and
overrides the other functions on the display.
In this phase the MODE key is disenabled.
When the hour meter reaches 99999 it re-
turns to zero. After 999 hours, the minutes
count is dropped.
Battery (15:F). The alphanumerical digits
indicate battery voltage.
 La spia accesa in-
dica che la presa di forza è attivata.
12V ON/OFF (15:H). If the indicator light is
on it means the rear accessory is active.
Headlamp (15:l). If the indicator light is on
it means that the headlamp, usually control-
led by a twilight sensor, is switched on.
   The indicator starts
to ash if machine tilt exceeds the 10° th-
reshold.
In the event of sensor malfunction the

Parking brake pedal (15:M). If the indica-
tor light is on it means that the parking brake
is on.
Seat (15:N). If the indicator light is on it me-
ans the driver is not seated.
Oil (15:P). If the indicator comes on while
the machine is in operation it means the oil
is low.
6.11 POWER TAKE-OFF (14:F)
Button to engage / disengage the PTO
(14:F). Press the button to engage / disen-
gage the PTO.
6.12 CUTTING HEIGHT ADJUSTMENT (14:G)
The machine has two buttons for adjusting the
cutting height:
Press to raise the cutting height.
Press to lower the cutting height.
The cutting mean assembly is connected to
the socket (16:A).
6.13 REAR ACCESSORY ADJUSTMENT
CONTROL (14:H; 14:I)
The machine has a control for electrically adjusting
the rear accessory (optional accessory).
The socket (17:B) (optional) for connecting the
accessory is located on the back right-hand side
of the machine.
The button can be used to lift and lower the
rear accessory.
6.14 REAR ACCESSORY CONTROL (14:L)
The machine is designed for use with an electrical
rear accessory.
The socket (17:A) for connecting the accessory
is located on the back right-hand side of the
machine.
Use this button to switch on/o the power
supply to the accessory.
For the rear accessory power rating, please refer
260


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Pro 740 IOX - P 901 PH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Pro 740 IOX - P 901 PH in the language / languages: All languages as an attachment in your email.

The manual is 160,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info