708059

Spektrum DX8 Manual

32
Zoom out
Zoom in
Previous page
1/42
Next page
32


The Swashplate Mix typically corrects swashplate timing issues by mixing Aileron
to Elevator and Elevator to Aileron. When adjusted correctly, the Swashplate
causes the helicopter to roll and pitch accurately with minimal inter-reaction.

With the C Mix screen displayed, rotate the roller to highlight Cyclic > Thro then
press. Select Swashplate and press the roller. The Swashplate Mix screen appears.

Rotate the roller to highlight the desired box at the bottom of the screen. Press the
roller to darken the box activating Swash Mix in that flight mode position. You can
highlight more than one flight mode position. If all boxes are highlighted, the C
Mix function is always on. If no boxes are highlighted, the function is always off.
N= Normal
1= Stunt 1
2= Stunt 2
H= Hold
M=Mix

Rotate the roller to highlight the desired rate then press. Rotate the roller to adjust
the value. You can reverse the direction of the slave channel with positive + and
negative – values. Adjust the rate for all desired Swashplate values.
Verify that the Swash mix is working properly and in the correct direction by
placing the flight mode switch in one of the active positions. Then, move the
programmed cyclic master channel aileron or elevator to its full travel and hold
this position. Now change the flight mode to a position that the swash mix is
inactive in. Note the movement of the slave channel on the left side of the monitor.

Programmable mixes allow any channel to be mixed to any other channel or to
itself. With helicopters Programmable mixes typically operate scale functions like
retracts, lights, etc.

With the C Mix screen displayed, rotate the roller to highlight Cyclic > Thro, then
press the roller. Select programmable Mix, 1, 2, 3, 4, 5, or 6 and press the roller.
The Mix screen appears.

The Master channel is the controlling channel and is mixed to the slave channel.
The slave channel follows the master channel’s input based on the rate that is
programmed.
Rotate the roller to highlight the left INH then press to access the master channel.
Select the desired master channel. Press the roller to accept.
Highlight the right INH then press the roller to access the slave channel. Select
the desired slave channel. Press the roller to accept.

Highlight the desired box at the bottom of the screen. Press the roller to darken
the box activating programmable mix in that flight mode position. Note you can
highlight more than one flight mode position. If you highlight all boxes, the
programmable mix function is always n. If no boxes are highlighted, the function
is always off.
N= Normal 1= Stunt 1
2= Stunt 2 H= Hold
M=Mix

Rotate the roller to highlight the desired rate then press. Rotate the roller to adjust
the value. You can reverse the direction of the slave channel with positive and
negative values. Adjust the rate for both directions/values.
You should verify that the programmable mix is working properly and in the
correct direction. Place the flight mode switch in one of the active positions.
EN
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 Quick start guide - English - 100 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info