708059
34
Zoom out
Zoom in
Previous page
1/42
Next page
34


Highlight Mode then press.
Select Inhibit, Count Down or Stop Watch. Press the roller to accept.
To Program a Time
Rotate the roller to highlight Time then press to access. You can highlight the
seconds or minutes. Press the roller to access minutes or second.
Rotate the roller to select the desired time. Press to accept.

Rotate the roller to highlight Tone then press to access. You can
Select Inh. Tone, Vibe or Tone /Vibe

Rotate the roller to highlight Start then press to access. Five start options are
available: Trainer switch, Throttle, Throttle 1-Time, L Trim and R Trim.
Throttle 1-time - The timer starts when the programmed throttle position is
exceeded and will continue regardless of the throttle position.
Throttle - The timer starts when the programmed throttle position is exceeded.
Anytime you lower the throttle below the programmed position, the timer will
pause then continue anytime the throttle is raised above that position. (This is
useful for flying electric models where the motor run time, not the flight time, is
important.)
Rotate the roller to select the desired Start method (Trainer, Throttle, Throttle
1-Time, L Trim, R Trim). Press to accept.


If you select Throttle or Throttle 1-Time in the Start function, the Stick appears
below Start in the Timer screen. This is the stick position where throttle activates
the timer. Rotate the roller to highlight Stick then press to access the Stick values.
You can adjust the value from 0 to 100%. This correlates to the actual throttle
stick position.
Rotate the roller to select the desired Stick value then press the roller to accept the
displayed value.

There are a couple of ways to reset the internal timer. Rotate the roller to highlight
Internal: Reset then press the roller to reset the internal timer to 0:00:00
To reset the Count Down or Stop Watch timer on the main screen,
press the Clear button.
EN
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 Quick start guide - English - 100 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info