726853
17
Zoom out
Zoom in
Previous page
1/42
Next page
17SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL
EN
Frame Rate
The Frame Rate menu enables you to change the frame rate,
modulation mode and activate XPLUS.
Select the option you wish to change and press the scroll wheel.
Frame Rate
You must use digital servos if you select 11ms frame rate.
Analog or digital servos can be used with 22ms frame rate.
Modulation Mode
We recommend using DSMX (default) modulation mode. When
DSMX is active, the transmitter operates in DSMX with DSMX
receivers and DSM2 with DSM2 receivers. The transmitter au-
tomatically detects DSM2 or DSMX during binding and changes
the mode accordingly to match the receiver type you are using.
If you select DSM2, the transmitter operates in DSM2 regardless
of whether it is bound to a DSM2 or DSMX receiver.
X-Plus Activation
Activate X-Plus channels in the Frame Rate Screen. You can set
X-Plus to INH (inhibit) or Act (activate).
NOTICE: While DSMX allows you to use more than 40 trans-
mitters simultaneously, do not use more than 40 transmitters
simultaneously when using a DSM2 receiver or a transmitter in
DSM2 mode.
CAUTION: Do NOT connect throttle or any primary
control surface to the X-Plus Module. The X-Plus
channels are intended to be used for auxiliary functions only.
X-Plus channels have a resolution of 512 and variable latency
from 22ms to about 88ms. When X-Plus is active, the fi rst 10
channels default to 22ms.
Prefl ight Setup
The Prefl ight Setup menu option enables you to program a
pre-fl ight checklist that appears each time you power on the
transmitter or when you select a new model memory. Each item
on the list must be confi rmed before you can access the Main
Screen.
Enabled
When Enabled is set to NO, Data Logging is turned off.
Select YES to save Telemetry data to the SD Card. The SD Card
must be installed in the transmitter to select YES.
CAUTION: If you access the Telemetry menu from the
Function List, you may see a Frame Loss appear when
you exit the menu. The Frame Loss is not an error, however there
is a momentary loss of radio signal when exiting the Telemetry
screen. Do NOT access the Telemetry menu during fl ight.
Bind
The Bind menu enables you to bind a transmitter and receiver
without powering off the transmitter. This menu is helpful if you
are programming a model and need to bind the receiver for
failsafe positions.
See “Programming Failsafe Positions” for more information.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX18 - SPM18000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX18 - SPM18000 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX18 - SPM18000

Spektrum DX18 - SPM18000 User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info